In Situ Fabrication of CdS-TiO2 Heterojunction Self-Supporting Electrode for Photoelectrochemical Glutathione Sensing
Langmuir · 02.11.2026
DOI: 10.1021/acs.langmuir.6c04673 ↗Kurz gefasst
Fachartikel in der Zeitschrift Langmuir, online erschienen am 02.11.2026. Verfasst von Yi-Lin Zheng und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry, The Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), National Demonstration Center for Experiment…. Die Arbeit nennt 48 Literaturangaben. Gefördert von: National Basic Research Program of China (973 Program), Henan Province Science and Technology Research and Development Joint Fund (Industry Category).
Abstract (Originalsprache)
Unlike conventional coated electrodes, self-supporting photoelectrodes inherently avoid interfacial resistance and material peeling, enabling superior charge separation and transport efficiency. In this study, a CdS-TiO2 heterojunction photoelectrode was fabricated via in situ growth of an anatase/rutile TiO2 film on FTO conductive glass, followed by CdS nanoparticle modification, and was employed to construct a photoelectrochemical (PEC) sensor for glutathione (GSH) detection. The morphology, structure, and composition of the electrode were analyzed in detail through systematic material characterization. Compared with the photoelectrode of the same composition loaded on a glassy carbon electrode, the self-supporting photoelectrode exhibits a stronger photocurrent. PEC evaluation results indicate that this self-supporting sensor exhibits relatively high sensing performance for GSH. Specifically, under visible light, the electrode exhibits a linear response to GSH in the range of 0–90 μM. The sensitivity is 0.348 nA cm–2 μM–1, and the limit of detection (LOD) is 8.3 μM (S/N = 3). Theoretical calculations and energy-level structure analysis reveal a staggered Type-II band structure at the CdS-TiO2 heterojunction. This heterojunction prolongs the lifetime of photogenerated electrons and enhances photoelectric conversion efficiency via spatially separated charge transfer pathways. Simultaneously, its abundant active interfaces provide sufficient active sites for the GSH oxidation reaction, thereby significantly enhancing the sensing signal. Obtained results provide material design strategies and experimental evidence for the development of highly efficient and reliable PEC sensors.
Autor:innen und Institutionen
- College of Chemistry, The Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), National Demonstration Center for Experimental Chemistry Education, Nankai University, Tianjin300071, China.
- Materials and Chemical Engineering College, Xingtai University, Xingtai054000, China.
- Henan Institute of Functional Materials Industry for Silicon Carbide, Pingdingshan467000, China.
ORCID-Profile: Shou-Min Zhang, Bao-Lin Zhu
Förderung
- National Basic Research Program of China (973 Program)
- Henan Province Science and Technology Research and Development Joint Fund (Industry Category)
Zitieren
APA
Zheng, Y. L., Huo, G. N., Luo, X. M., Dong, J. X., Zhang, S. M., & Zhu, B. L. (2026). In Situ Fabrication of CdS-TiO2 Heterojunction Self-Supporting Electrode for Photoelectrochemical Glutathione Sensing. Langmuir. https://doi.org/10.1021/acs.langmuir.6c04673
Vancouver
Zheng YL, Huo GN, Luo XM, Dong JX, Zhang SM, Zhu BL. In Situ Fabrication of CdS-TiO2 Heterojunction Self-Supporting Electrode for Photoelectrochemical Glutathione Sensing. Langmuir. 2026. doi:10.1021/acs.langmuir.6c04673
BibTeX
@article{Zheng2026,
author = {Zheng, Yi-Lin and Huo, Guo-Na and Luo, Xian-Mei and Dong, Jian-Xun and Zhang, Shou-Min and Zhu, Bao-Lin},
title = {In Situ Fabrication of CdS-TiO2 Heterojunction Self-Supporting Electrode for Photoelectrochemical Glutathione Sensing},
journal = {Langmuir},
year = {2026},
doi = {10.1021/acs.langmuir.6c04673}
}
EUVIMED