EUVIMEDEUVIMED entdecken
Crossref

Enhancing the High-Temperature Tribological Performance of Cr 3 C 2 –NiCr/AlCrN Duplex Coatings Via Optimizing Cermet Interlayer Thickness

Feng Mao, Dongqing He iD, Xiangxiang Pan, Lunlin Shang, Jun Cao iD

Langmuir · 24.03.2026 · 42 (11) · 7917-7928

DOI: 10.1021/acs.langmuir.5c06532 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Langmuir, online erschienen am 10.03.2026. Verfasst von Feng Mao und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: Aeronautical Science Foundation of China, Science and Technology Program of Gansu Province, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the effects of Cr3C2-NiCr interlayer thickness on the high-temperature tribological performance of the Cr3C2-NiCr/AlCrN duplex coatings against the YG6 counterpart ball at 650 °C. The results demonstrated that the cermet interlayer with a thickness of less than 100 μm provided insufficient support for the AlCrN films, leading to severe deformation and cracking. The primary wear mechanisms of the duplex coatings were oxidative wear and abrasive wear. Finite element simulation results indicated that when the cermet interlayer thickness exceeded 100 μm, the high contact stress in the frictional contact zone accelerated the rupture of the oxide film at the wear interface, leading to severe oxidative wear of the duplex coatings. The 100 μm thick cermet interlayer provided sufficient support for the AlCrN films, enabled smooth transfer of contact stress, and facilitated the rapid formation of a protective tribo-oxidation film on the wear track. Consequently, the duplex coatings exhibited optimal high-temperature tribological performance.

Autor:innen und Institutionen

  • State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China.
  • State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China.
  • College of Mechanical and Electrical Engineering, Wenzhou University, Wenzhou 325025, China.

ORCID-Profile: Dongqing He, Jun Cao

Förderung

  • Aeronautical Science Foundation of China
  • Science and Technology Program of Gansu Province
  • National Natural Science Foundation of China
  • Lanzhou University of Technology
  • Natural Science Foundation of Gansu Province

Zitieren

APA

Mao, F., He, D., Pan, X., Shang, L., & Cao, J. (2026). Enhancing the High-Temperature Tribological Performance of Cr 3 C 2 –NiCr/AlCrN Duplex Coatings Via Optimizing Cermet Interlayer Thickness. Langmuir, 42(11), 7917-7928. https://doi.org/10.1021/acs.langmuir.5c06532

Vancouver

Mao F, He D, Pan X, Shang L, Cao J. Enhancing the High-Temperature Tribological Performance of Cr 3 C 2 –NiCr/AlCrN Duplex Coatings Via Optimizing Cermet Interlayer Thickness. Langmuir. 2026;42(11):7917-7928. doi:10.1021/acs.langmuir.5c06532

BibTeX
@article{Mao2026,
  author = {Mao, Feng and He, Dongqing and Pan, Xiangxiang and Shang, Lunlin and Cao, Jun},
  title = {Enhancing the High-Temperature Tribological Performance of Cr 3 C 2 –NiCr/AlCrN Duplex Coatings Via Optimizing Cermet Interlayer Thickness},
  journal = {Langmuir},
  year = {2026},
  volume = {42},
  number = {11},
  pages = {7917--7928},
  doi = {10.1021/acs.langmuir.5c06532}
}
Kostenlos starten →