EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Highly Sensitive Ammonia Gas Sensor Based on MWCNTs Saturated Fe 2 O 3 Nanograins

Mikayel Aleksanyan, Artak Sayunts iD, Gevorg Shahkhatuni, Zarine Simonyan, Davit Kananov, Andranik Grigoryan, Rima Papovyan, Dušan Kopecký

Langmuir · 07.10.2025 · 41 (39) · 26614-26627

DOI: 10.1021/acs.langmuir.5c02458 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Langmuir, online erschienen am 28.09.2025. Verfasst von Mikayel Aleksanyan und 7 weiteren Autor:innen. Beteiligte Einrichtung: Center of Semiconductor Devices and Nanotechnologies, Yerevan State University, 1 Alex Manoogian, 0025 Yerevan, Armenia. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Committee of Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ammonia has a wide range of applications in various branches of industry and technology; the detection of its low concentrations is a preventive method for ambient air quality pollution and a useful method for noninvasive diagnosis of kidney disease by monitoring in exhaled human breath. In this work, a high-performance ammonia sensor based on the Fe2O3/MWCNTs (multiwalled carbon nanotubes) material was produced by applying the e-beam deposition method. The morphology, composition, and chemical state of the Fe2O3/MWCNTs material were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy (Raman), Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The gas-sensing behavior of the sensor to various concentrations of NH3 was measured at 200 °C, representing excellent gas response and sophisticated performance parameters. The low detection limit of the Fe2O3/MWCNTs sensor was 3 ppm of NH3, corresponding to the response value of 2.7. The promising values of the response and recovery times (40 and 25 s) confirmed the high speed of ammonia detection. Thus, the suggested Fe2O3/MWCNTs material that is sensitive to low concentrations of NH3 can be successfully used in a new generation of ammonia alarm systems.

Autor:innen und Institutionen

  • Center of Semiconductor Devices and Nanotechnologies, Yerevan State University, 1 Alex Manoogian, 0025 Yerevan, Armenia.
  • Department of Mathematics, Informatics and Cybernetics, Faculty of Chemical Engineering, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague 6, Czech Republic.

ORCID-Profile: Artak Sayunts

Förderung

  • State Committee of Science

Zitieren

APA

Aleksanyan, M., Sayunts, A., Shahkhatuni, G., Simonyan, Z., Kananov, D., Grigoryan, A., Papovyan, R., & Kopecký, D. (2025). Highly Sensitive Ammonia Gas Sensor Based on MWCNTs Saturated Fe 2 O 3 Nanograins. Langmuir, 41(39), 26614-26627. https://doi.org/10.1021/acs.langmuir.5c02458

Vancouver

Aleksanyan M, Sayunts A, Shahkhatuni G, Simonyan Z, Kananov D, Grigoryan A, et al. Highly Sensitive Ammonia Gas Sensor Based on MWCNTs Saturated Fe 2 O 3 Nanograins. Langmuir. 2025;41(39):26614-26627. doi:10.1021/acs.langmuir.5c02458

BibTeX
@article{Aleksanyan2025,
  author = {Aleksanyan, Mikayel and Sayunts, Artak and Shahkhatuni, Gevorg and Simonyan, Zarine and Kananov, Davit and Grigoryan, Andranik and Papovyan, Rima and Kopecký, Dušan},
  title = {Highly Sensitive Ammonia Gas Sensor Based on MWCNTs Saturated Fe 2 O 3 Nanograins},
  journal = {Langmuir},
  year = {2025},
  volume = {41},
  number = {39},
  pages = {26614--26627},
  doi = {10.1021/acs.langmuir.5c02458}
}
Kostenlos starten →