Preparation of Superhydrophobic and Multifunctional Sponges for Oil/Water Separation and Oil Absorption
Langmuir · 12.11.2024 · 40 (45) · 23902-23917
DOI: 10.1021/acs.langmuir.4c03036 ↗Kurz gefasst
Fachartikel in der Zeitschrift Langmuir, online erschienen am 01.11.2024. Verfasst von Zhishuang Han und 10 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering, Changchun University of Technology, Changchun 130012, P. R. China. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: Jilin Provincial Scientific and Technological Development Program, National Natural Science Foundation of China, Education Department of Jilin Province.
Abstract (Originalsprache)
For settling the recycling problem of waste polyurethane sponges (PU) and environment pollution of oil spills simultaneously, this work exploited the multifunctional superhydrophobic PU materials via the dip-coating method, which were prepared by anchoring modified Fe3O4 and expandable graphite (EG) on PU sponges under the adhesion effect of polydimethylsiloxane (PDMS). The water contact angle and sliding angle of as-prepared PU sponges reached 154.1 ± 1.6 and 8°, respectively. Most importantly, the superhydrophobic PU sponges were endowed with the multipath oil treatment ability, which consisted of magnetically driven, gravity-driven, peristaltic pump-driven, and photothermally driven modes. Besides, the light oil absorption capacity, separation flux, and efficiency for superhydrophobic PU sponges reached 23.9 g/g, 27779 L m-2 h-1, and 99.5%, respectively. Owing to the photothermal conversion ability of Fe3O4 and EG, the temperature of superhydrophobic PU sponges was raised to 71.5 °C within 233 s under 1.2 solar irradiation (1200 W/m2), demonstrating its absorption potential for high-viscosity crude oils. In addition, the prepared sponges exhibited good chemical/mechanical stability, self-cleaning, and flame retardancy. In a nutshell, this article has evolved an environmentally benign and practical method for fabricating the multifunctional materials in oil spill treatment, which will efficiently accomplish the targets of low carbon and environmental management.
Autor:innen und Institutionen
- School of Chemical Engineering, Changchun University of Technology, Changchun 130012, P. R. China.
- Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun 130022, P. R. China.
- State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, P. R. China.
ORCID-Profile: Zaihang Zheng
Förderung
- Jilin Provincial Scientific and Technological Development Program
- National Natural Science Foundation of China
- Education Department of Jilin Province
- State Key Laboratory of Automotive Simulation and Control
Zitieren
APA
Han, Z., Lv, X., Li, Y., Gao, M., Tang, Z., Su, X., Zhang, Z., Li, H., He, J., Zheng, Z., & Liu, Y. (2024). Preparation of Superhydrophobic and Multifunctional Sponges for Oil/Water Separation and Oil Absorption. Langmuir, 40(45), 23902-23917. https://doi.org/10.1021/acs.langmuir.4c03036
Vancouver
Han Z, Lv X, Li Y, Gao M, Tang Z, Su X, et al. Preparation of Superhydrophobic and Multifunctional Sponges for Oil/Water Separation and Oil Absorption. Langmuir. 2024;40(45):23902-23917. doi:10.1021/acs.langmuir.4c03036
BibTeX
@article{Han2024,
author = {Han, Zhishuang and Lv, Xinmeng and Li, Yingge and Gao, Meihuan and Tang, Zhenlin and Su, Xinying and Zhang, Ziyang and Li, Haidi and He, Jing and Zheng, Zaihang and Liu, Yan},
title = {Preparation of Superhydrophobic and Multifunctional Sponges for Oil/Water Separation and Oil Absorption},
journal = {Langmuir},
year = {2024},
volume = {40},
number = {45},
pages = {23902--23917},
doi = {10.1021/acs.langmuir.4c03036}
}
EUVIMED