Linearly Scaling Molecular Dynamic Modeling To Simulate Picosecond Laser Ablation of a Silicon Carbide Crystal
Langmuir · 26.11.2024 · 40 (47) · 24978-24988
DOI: 10.1021/acs.langmuir.4c03019 ↗Kurz gefasst
Fachartikel in der Zeitschrift Langmuir, online erschienen am 15.11.2024. Verfasst von Fu Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Design and Manufacturing Technology for Vehicle, Hunan University, Changsha, Hunan 410082, People's Republic of Chin…. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
A molecular dynamics model for picosecond laser ablation of nanoscale silicon carbide crystals was established by linearly scaling the laser focal diameter, and the correlation between the molecular dynamic simulation of the nanoscale and the experimental reproduction of the microscale was achieved. The calculation accuracy of the molecular dynamic model was verified by ablating the surface of silicon carbide wafers with a laser pulse width of 37 ps. On this basis, this paper further investigated the influence of the laser pulse width and fluence on the surface ablation damage and modification width, threshold, and lattice temperature. The results showed that, when the laser pulse width is higher than 10 ps, the silicon carbide damage threshold increases with increasing the pulse width, while the modification threshold is almost unaffected by the pulse width. In addition, the influence of crystal orientation has been studied, and laser irradiation along the [1-100] crystal orientation induces a higher peak temperature, larger damage, and modification width and threshold, followed by irradiation along the [0001] crystal orientation and lowest along the [11-20] crystal orientation. Finally, with the linear scaling value increasing, the spatial distribution of the laser energy field deviates more from the actual situation, resulting in the calculated results being more consistent with the experimental results. Through this paper, it is demonstrated that this linearly scaled molecular dynamics model can be used to study laser ablation results over tens of micrometers.
Autor:innen und Institutionen
- State Key Laboratory of Advanced Design and Manufacturing Technology for Vehicle, Hunan University, Changsha, Hunan 410082, People's Republic of China.
- Key Laboratory for Intelligent Laser Manufacturing of Hunan Province, Hunan University, Changsha, Hunan 410082, People's Republic of China.
ORCID-Profile: Yi Zhang
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Liu, F., Cao, S., Li, B., Liang, R., & Zhang, Y. (2024). Linearly Scaling Molecular Dynamic Modeling To Simulate Picosecond Laser Ablation of a Silicon Carbide Crystal. Langmuir, 40(47), 24978-24988. https://doi.org/10.1021/acs.langmuir.4c03019
Vancouver
Liu F, Cao S, Li B, Liang R, Zhang Y. Linearly Scaling Molecular Dynamic Modeling To Simulate Picosecond Laser Ablation of a Silicon Carbide Crystal. Langmuir. 2024;40(47):24978-24988. doi:10.1021/acs.langmuir.4c03019
BibTeX
@article{Liu2024,
author = {Liu, Fu and Cao, Shiyu and Li, Bin and Liang, Renchao and Zhang, Yi},
title = {Linearly Scaling Molecular Dynamic Modeling To Simulate Picosecond Laser Ablation of a Silicon Carbide Crystal},
journal = {Langmuir},
year = {2024},
volume = {40},
number = {47},
pages = {24978--24988},
doi = {10.1021/acs.langmuir.4c03019}
}
EUVIMED