3D Aligned Nanofiber Scaffold Fabrication with Trench-Guided Electrospinning for Cardiac Tissue Engineering
Langmuir · 05.03.2024 · 40 (9) · 4709-4718
DOI: 10.1021/acs.langmuir.3c03358 ↗Kurz gefasst
Fachartikel in der Zeitschrift Langmuir, online erschienen am 22.02.2024. Verfasst von Bin Qiu und 13 weiteren Autor:innen. Beteiligte Einrichtung: Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen 361102, China. Hauptthemen laut MEDLINE: Tissue Engineering, Nanofibers. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Constructing three-dimensional (3D) aligned nanofiber scaffolds is significant for the development of cardiac tissue engineering, which is promising in the field of drug discovery and disease mechanism study. However, the current nanofiber scaffold preparation strategy, which mainly includes manual assembly and hybrid 3D printing, faces the challenge of integrated fabrication of morphology-controllable nanofibers due to its cross-scale structural feature. In this research, a trench-guided electrospinning (ES) strategy was proposed to directly fabricate 3D aligned nanofiber scaffolds with alternative ES and a direct ink writing (DIW) process. The electric field effect of DIW poly(dimethylsiloxane) (PDMS) side walls on guiding whipping ES nanofibers was investigated to construct trench design rules. It was found that the width/height ratio of trenches greatly affected the nanofiber alignment, and the trench width/height ratio of 1.5 provided the nanofiber alignment degree over 60%. As a proof of principle, 3D nanofiber scaffolds with controllable porosity (60-80%) and alignment (30-60%) were fabricated. The effect of the scaffolds was verified by culturing human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs), which resulted in the uniform 3D distribution of aligned hiPSC-CMs with ∼1000 μm thickness. Therefore, this printing strategy shows great potential for the efficient engineered tissue construction.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen 361102, China.
- School of Life Sciences, Xiamen University, Xiamen 361102, China.
- Guangdong Provincial People's Hospital, Guangzhou 510080, China.
- Guangdong Beating Origin Regenerative Medicine Co. Ltd., Foshan 528231, Guangdong, China.
- Department of Engineering and System Science, National Tsing Hua University, Hsinchu 300044, Taiwan, China.
ORCID-Profile: Bin Qiu, Yu-Chuan Su
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Qiu, B., Wu, D., Xue, M., Ou, L., Zheng, Y., Xu, F., Jin, H., Gao, Q., Zhuang, J., Cen, J., Lin, B., Su, Y. C., Chen, S., & Sun, D. (2024). 3D Aligned Nanofiber Scaffold Fabrication with Trench-Guided Electrospinning for Cardiac Tissue Engineering. Langmuir, 40(9), 4709-4718. https://doi.org/10.1021/acs.langmuir.3c03358
Vancouver
Qiu B, Wu D, Xue M, Ou L, Zheng Y, Xu F, et al. 3D Aligned Nanofiber Scaffold Fabrication with Trench-Guided Electrospinning for Cardiac Tissue Engineering. Langmuir. 2024;40(9):4709-4718. doi:10.1021/acs.langmuir.3c03358
BibTeX
@article{Qiu2024,
author = {Qiu, Bin and Wu, Dongyang and Xue, Mingcheng and Ou, Lu and Zheng, Yanfei and Xu, Feng and Jin, Hang and Gao, Qiang and Zhuang, Jian and Cen, Jianzheng and Lin, Bin and Su, Yu-Chuan and Chen, Songyue and Sun, Daoheng},
title = {3D Aligned Nanofiber Scaffold Fabrication with Trench-Guided Electrospinning for Cardiac Tissue Engineering},
journal = {Langmuir},
year = {2024},
volume = {40},
number = {9},
pages = {4709--4718},
doi = {10.1021/acs.langmuir.3c03358}
}
EUVIMED