EUVIMEDEUVIMED entdecken
Crossref

Fabrication of Textured Ni-Coated Carbon Tubes for a Flexible Strain Sensor: Effect of the Device Elastic Modulus on Sensor Performance

Housheng Xia, Haodong Ma, Di Sun, Zhenming Chen, Shufeng Wang, Peng Li, Junjun Huang iD, Chengmei Gui iD

Langmuir · 11.07.2023 · 39 (27) · 9551-9563

DOI: 10.1021/acs.langmuir.3c01168 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Langmuir, online erschienen am 27.06.2023. Verfasst von Housheng Xia und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Biological and Chemical Engineering, Zhejiang University of Science and Technology, Hangzhou City 310023, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 68 Literaturangaben. Gefördert von: Natural Science Foundation for Distinguished Young Scholars of Anhui Province, Science and Technology Department of Zhejiang Province, Natural Science Foundation of Guangxi Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The exploration of flexible resistive sensors with excellent performance remains a challenge. In this paper, a nickel-coated carbon tube with a textured structure was prepared as a conductive sensitive material and inserted into the poly(dimethylsiloxane) (PDMS) polymer; interestingly, the sensor performance was controlled by the elastic modulus of the matrix resin. The results show that Pd2+ may be adsorbed by the active groups on the surface of a plant fiber as a catalytic center for the reduction of Ni2+. After 300 °C annealing, the inner plant fiber would be carbonized and attached to the outside of the nickel tube; to be precise, the textured Ni-encapsulated C tube was fabricated successfully. It is worth noting that the C tube serves as a layer of support for the external Ni coating, providing sufficient mechanical strength. In addition, resistance sensors with different properties were prepared by controlling the elasticity modulus of the PDMS polymer by introducing different contents of curing agents. The limit uniaxial tensile strain was enhanced from 42 to 49% and sensitivity reduced from 0.2 to 2.0% with the elasticity modulus of the matrix resin increasing from 0.32 to 2.2 MPa. As expected, the sensor is obviously appropriate for the detection of elbow joints, human speaking, and human joints with the reduction of the elasticity modulus of the matrix resin. To be precise, the optimal elastic modulus of the sensor matrix resin would facilitate the improvement of its sensitivity to monitor different human behaviors.

Autor:innen und Institutionen

  • School of Biological and Chemical Engineering, Zhejiang University of Science and Technology, Hangzhou City 310023, China.
  • School of Energy Materials and Chemical Engineering, Hefei University, Hefei City 230601, China.
  • Guangxi Key Laboratory of Calcium Carbonate Resources Comprehensive Utilization, College of Materials and Chemical Engineering, Hezhou University, Hezhou City 542899, China.
  • School of Chemistry and Chemical Engineering, Chaohu University, Hefei City 230009, China.

ORCID-Profile: Junjun Huang, Chengmei Gui

Förderung

  • Natural Science Foundation for Distinguished Young Scholars of Anhui Province
  • Science and Technology Department of Zhejiang Province
  • Natural Science Foundation of Guangxi Province
  • Science and Technology Department of Guangxi Zhuang Autonomous

Zitieren

APA

Xia, H., Ma, H., Sun, D., Chen, Z., Wang, S., Li, P., Huang, J., & Gui, C. (2023). Fabrication of Textured Ni-Coated Carbon Tubes for a Flexible Strain Sensor: Effect of the Device Elastic Modulus on Sensor Performance. Langmuir, 39(27), 9551-9563. https://doi.org/10.1021/acs.langmuir.3c01168

Vancouver

Xia H, Ma H, Sun D, Chen Z, Wang S, Li P, et al. Fabrication of Textured Ni-Coated Carbon Tubes for a Flexible Strain Sensor: Effect of the Device Elastic Modulus on Sensor Performance. Langmuir. 2023;39(27):9551-9563. doi:10.1021/acs.langmuir.3c01168

BibTeX
@article{Xia2023,
  author = {Xia, Housheng and Ma, Haodong and Sun, Di and Chen, Zhenming and Wang, Shufeng and Li, Peng and Huang, Junjun and Gui, Chengmei},
  title = {Fabrication of Textured Ni-Coated Carbon Tubes for a Flexible Strain Sensor: Effect of the Device Elastic Modulus on Sensor Performance},
  journal = {Langmuir},
  year = {2023},
  volume = {39},
  number = {27},
  pages = {9551--9563},
  doi = {10.1021/acs.langmuir.3c01168}
}
Kostenlos starten →