Phase Stability of Hexacelsian Initially Formed as Low-Crystalline Spherical Particles
Inorganic Chemistry · 11.11.2026
DOI: 10.1021/acs.inorgchem.6c04962 ↗Kurz gefasst
Fachartikel in der Zeitschrift Inorganic Chemistry, online erschienen am 11.11.2026. Verfasst von Shingo Machida und 5 weiteren Autor:innen. Beteiligte Einrichtung: Materials Research and Development Laboratory, Japan Fine Ceramics Center, 2-4-1, Mutsuno, Atsuta-ku, Nagoya, Aichi456-8587, Japan. Die Arbeit nennt 47 Literaturangaben. Gefördert von: Nippon Sheet Glass Foundation for Materials Science and Engineering.
Abstract (Originalsprache)
Hexacelsian, a layered polymorph of BaAl2Si2O8, is attractive for high-temperature applications but eventually transforms into celsian, the stable polymorph without a layered structure. In this study, spherical BaAl2Si2O8 precursors were prepared by spray pyrolysis. The as-prepared precursor was identified as low-crystalline hexacelsian with a spherical morphology. Upon heat treatment, crystalline hexacelsian formed exclusively over a wide temperature range. Notably, hexacelsian persisted even after heat treatment at 1300 °C for 136 h and 1500 °C for 181 h, conditions under which celsian formation has been reported for clay-derived and conventionally mixed precursors. X-ray diffraction, solid-state nuclear magnetic resonance, electron diffraction, and Rietveld refinement showed that the specimens calcined at 1000 °C consisted of mixed α- and β-hexacelsian phases, whereas the calcined specimen at 1500 °C was assigned to the β-phase. Mechanistic investigations indicate that the overall composition, together with the mixing state of Ba, Al, and Si achieved by spray pyrolysis, contributes to the stabilization of hexacelsian. Furthermore, compact specimens prepared from the spherical precursor exhibited reduced preferred orientation of platy hexacelsian grains compared with those derived from platy clay-based precursors. Thus, spray-pyrolyzed spherical precursors offer a useful route for improving the phase stability and processing characteristics of hexacelsian.
Autor:innen und Institutionen
- Materials Research and Development Laboratory, Japan Fine Ceramics Center, 2-4-1, Mutsuno, Atsuta-ku, Nagoya, Aichi456-8587, Japan.
- Division of Advanced Ceramics, Nagoya Institute of Technology, Gokiso, Showa-ku, Nagoya, Aichi466-8555, Japan.
- Materials Characterization Central Laboratory, School of Science and Engineering, Waseda University, 3-4-1, Okubo, Shinjuku-ku, Tokyo169-8585, Japan.
ORCID-Profile: Shingo Machida, Daisuke Urushihara, Toshimichi Shibue
Förderung
- Nippon Sheet Glass Foundation for Materials Science and Engineering
Zitieren
APA
Machida, S., Urushihara, D., Yokoe, D., Shibue, T., Suzuki, M., & Kawahara, K. (2026). Phase Stability of Hexacelsian Initially Formed as Low-Crystalline Spherical Particles. Inorganic Chemistry. https://doi.org/10.1021/acs.inorgchem.6c04962
Vancouver
Machida S, Urushihara D, Yokoe D, Shibue T, Suzuki M, Kawahara K. Phase Stability of Hexacelsian Initially Formed as Low-Crystalline Spherical Particles. Inorganic Chemistry. 2026. doi:10.1021/acs.inorgchem.6c04962
BibTeX
@article{Machida2026,
author = {Machida, Shingo and Urushihara, Daisuke and Yokoe, Daisaku and Shibue, Toshimichi and Suzuki, Masaya and Kawahara, Koichi},
title = {Phase Stability of Hexacelsian Initially Formed as Low-Crystalline Spherical Particles},
journal = {Inorganic Chemistry},
year = {2026},
doi = {10.1021/acs.inorgchem.6c04962}
}
EUVIMED