EUVIMEDEUVIMED entdecken
Crossref

Topochemical Conversion of Ti3AlC2 to Ti3C2T x MXene via Kinetically Accelerated Microwave Etching and Targeted Byproduct Purification

Jaebeen Ahn, Dongho Lee, Myeongseo Kang, Jongmin Lee, Simon S. Park, Taewook Kim, Changyong Yim

Inorganic Chemistry · 31.10.2026

DOI: 10.1021/acs.inorgchem.6c04093 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Inorganic Chemistry, online erschienen am 31.10.2026. Verfasst von Jaebeen Ahn und 6 weiteren Autor:innen. Die Arbeit nennt 68 Literaturangaben. Gefördert von: National Research Foundation of Korea, Ministry of Trade, Industry and Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Achieving high synthesis throughput without sacrificing the structural integrity of two-dimensional (2D) Ti3C2Tx MXenes remains a primary challenge, as conventional minimally intensive layer delamination (MILD) requires prolonged etching (∼24 h) that induces surface degradation and nonstructural carbon defects. Herein, we demonstrate a rapid microwave-assisted (MW) etching strategy combined with targeted sulfuric acid (H2SO4) byproduct purification to produce highly crystalline Ti3C2Tx MXenes within 1 h of total process time (120 °C MW etching for 30 min; 100 °C H2SO4 washing for 30 min). Avrami-Erofe’ev kinetic modeling reveals that MW irradiation reduces the apparent activation energy (Ea) to 25.51 ± 0.73 kJ mol–1 (R2 = 0.9976)─approximately 54% lower than the conventional HF etching benchmark (55.2 kJ mol–1)─significantly accelerating topochemical conversion. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDS) confirm that this accelerated kinetic regime effectively suppresses acidic overetching, yielding a lower relative C–C defect ratio (47.25%) while fully preserving the Ti–C framework. Furthermore, postpurification with 3 M H2SO4 completely removes insoluble crystalline Li3AlF6 byproducts. The resulting predominantly single- to few-layer delaminated MXene nanosheets assemble into flexible freestanding films with an outstanding electrical conductivity of 2.64 × 103 S cm–1. This work establishes a scalable kinetic pathway for high-speed, defect-minimized manufacturing of 2D MXenes.

Förderung

  • National Research Foundation of Korea
  • Ministry of Trade, Industry and Energy

Zitieren

APA

Ahn, J., Lee, D., Kang, M., Lee, J., Park, S. S., Kim, T., & Yim, C. (2026). Topochemical Conversion of Ti3AlC2 to Ti3C2T x MXene via Kinetically Accelerated Microwave Etching and Targeted Byproduct Purification. Inorganic Chemistry. https://doi.org/10.1021/acs.inorgchem.6c04093

Vancouver

Ahn J, Lee D, Kang M, Lee J, Park SS, Kim T, et al. Topochemical Conversion of Ti3AlC2 to Ti3C2T x MXene via Kinetically Accelerated Microwave Etching and Targeted Byproduct Purification. Inorganic Chemistry. 2026. doi:10.1021/acs.inorgchem.6c04093

BibTeX
@article{Ahn2026,
  author = {Ahn, Jaebeen and Lee, Dongho and Kang, Myeongseo and Lee, Jongmin and Park, Simon S. and Kim, Taewook and Yim, Changyong},
  title = {Topochemical Conversion of Ti3AlC2 to Ti3C2T x MXene via Kinetically Accelerated Microwave Etching and Targeted Byproduct Purification},
  journal = {Inorganic Chemistry},
  year = {2026},
  doi = {10.1021/acs.inorgchem.6c04093}
}
Kostenlos starten →