Synthesis, Characterization, and Electron-Beam Lithography of Tetakis(Triphenylstannyl) Orthosilicate and Tetrakis(Triacetoxystannyl) Orthosilicate for the Development of Inorganic Molecular EUV Resists
Inorganic Chemistry · 25.05.2026 · 65 (20) · 10936-10947
DOI: 10.1021/acs.inorgchem.6c00250 ↗Kurz gefasst
Fachartikel in der Zeitschrift Inorganic Chemistry, online erschienen am 14.05.2026. Verfasst von Jiyoung Bang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Chonnam National University, Gwangju 61186, Republic of Korea. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 67 Literaturangaben. Gefördert von: National Research Foundation of Korea, Korea Evaluation Institute of Industrial Technology.
Abstract (Originalsprache)
As the continued miniaturization of semiconductor devices drives the adoption of extreme ultraviolet (EUV) lithography, inorganic molecular photoresists have attracted attention because of their small molecular size and high etch resistance. Among them, tin-oxo clusters are especially promising because of their high EUV absorption cross sections. Herein, we report the synthesis of tetrakis(triphenylstannyl) orthosilicate as an inorganic molecular photoresist candidate. Its structure was determined by single-crystal X-ray diffraction (SC-XRD) and supported by 1H, 13C, 119Sn, and 29Si NMR spectroscopy and field-desorption mass spectrometry (FD-MS). However, the compound exhibited extremely poor solubility in common organic solvents, limiting its applicability in lithography. To overcome this limitation, the phenyl ligands were replaced with acetoxy groups, yielding tetrakis(triacetoxystannyl) orthosilicate. Its structure was confirmed by 1H, 13C, 119Sn, and 29Si NMR spectroscopy, and the solubility was improved, enabling uniform thin-film formation. Electron-beam lithography evaluation demonstrated high sensitivity, producing 30 and 20 nm half-pitch line/space patterns at doses of 700 and 1500 μC/cm2, respectively. These results indicate that tetrakis(triacetoxystannyl) orthosilicate is a promising inorganic molecular photoresist candidate for EUV lithography.
Autor:innen und Institutionen
- Department of Chemistry, Chonnam National University, Gwangju 61186, Republic of Korea.
- JSI Silicone Inc., Seongnam-si, Gyeonggi-do 13207, Republic of Korea.
ORCID-Profile: Yusun Won, Hyun-Dam Jeong
Förderung
- National Research Foundation of Korea
- Korea Evaluation Institute of Industrial Technology
Zitieren
APA
Bang, J., Yun, H., Heo, S., Won, Y., Kang, S., Jung, H., & Jeong, H. D. (2026). Synthesis, Characterization, and Electron-Beam Lithography of Tetakis(Triphenylstannyl) Orthosilicate and Tetrakis(Triacetoxystannyl) Orthosilicate for the Development of Inorganic Molecular EUV Resists. Inorganic Chemistry, 65(20), 10936-10947. https://doi.org/10.1021/acs.inorgchem.6c00250
Vancouver
Bang J, Yun H, Heo S, Won Y, Kang S, Jung H, et al. Synthesis, Characterization, and Electron-Beam Lithography of Tetakis(Triphenylstannyl) Orthosilicate and Tetrakis(Triacetoxystannyl) Orthosilicate for the Development of Inorganic Molecular EUV Resists. Inorganic Chemistry. 2026;65(20):10936-10947. doi:10.1021/acs.inorgchem.6c00250
BibTeX
@article{Bang2026,
author = {Bang, Jiyoung and Yun, Hyeok and Heo, Soyeong and Won, Yusun and Kang, Seunghwan and Jung, Hyuntae and Jeong, Hyun-Dam},
title = {Synthesis, Characterization, and Electron-Beam Lithography of Tetakis(Triphenylstannyl) Orthosilicate and Tetrakis(Triacetoxystannyl) Orthosilicate for the Development of Inorganic Molecular EUV Resists},
journal = {Inorganic Chemistry},
year = {2026},
volume = {65},
number = {20},
pages = {10936--10947},
doi = {10.1021/acs.inorgchem.6c00250}
}
EUVIMED