Preparation of High-Purity Nano-Iron Phosphate from Titanium-Extraction Tailings by Co-Leaching Synergetic Ultrasonic-Enhanced Precipitation Process
Inorganic Chemistry · 02.12.2024 · 63 (48) · 23004-23014
DOI: 10.1021/acs.inorgchem.4c04229 ↗Kurz gefasst
Fachartikel in der Zeitschrift Inorganic Chemistry, erschienen am 02.12.2024. Verfasst von Xianqing Xu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mineral Processing and Bioengineering, Central South University, Changsha 410083, Hunan, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Scientific Research and Technology Development Program of Guangxi Zhuang Autonomous Region.
Abstract (Originalsprache)
The preparation of high-performance electrode materials from metallurgical solid waste is an effective strategy to address current energy and environmental challenges. This study utilizes a mixed acid leaching and ultrasound-assisted precipitation process to extract valuable metallic iron from titanium-extraction tailings (TET) to produce high-purity nano-FePO4 electrode material precursors with unique crystal structures. A leaching efficiency of 95.2% for Fe was attained by using the optimized process parameters, which included a mixed acid concentration of 4 mol/L, a liquid-to-solid ratio of 4:1, and a leaching temperature of 70 °C for 1 h. The optimal precipitation conditions were a pH of 2.0, a temperature of 60 °C, an aging time of 30 min, and a stirring speed of 600 rpm, resulting in FePO4 purity up to 99.6% and fine particle size. Thermodynamic calculations, combined with various characterizations, elucidated the leaching and precipitation mechanisms, highlighting the synergistic effect of phosphoric acid and hydrochloric acid in enhancing the leaching reaction. The thermogravimetric analysis indicated that the decomposition of residual ammonium chloride impurities requires calcination above 360 °C. This research not only provides new insights into the high-value, clean utilization of metallurgical solid waste but also supports sustainable resource recovery and environmental protection by transforming waste into valuable products.
Autor:innen und Institutionen
- School of Mineral Processing and Bioengineering, Central South University, Changsha 410083, Hunan, China.
ORCID-Profile: Xianqing Xu, Zhengqi Guo
Förderung
- National Natural Science Foundation of China
- Scientific Research and Technology Development Program of Guangxi Zhuang Autonomous Region
Zitieren
APA
Xu, X., Tian, X., Guo, Z., Zhu, D., Pan, J., Yang, C., & Li, S. (2024). Preparation of High-Purity Nano-Iron Phosphate from Titanium-Extraction Tailings by Co-Leaching Synergetic Ultrasonic-Enhanced Precipitation Process. Inorganic Chemistry. https://doi.org/10.1021/acs.inorgchem.4c04229
Vancouver
Xu X, Tian X, Guo Z, Zhu D, Pan J, Yang C, et al. Preparation of High-Purity Nano-Iron Phosphate from Titanium-Extraction Tailings by Co-Leaching Synergetic Ultrasonic-Enhanced Precipitation Process. Inorganic Chemistry. 2024. doi:10.1021/acs.inorgchem.4c04229
BibTeX
@article{Xu2024,
author = {Xu, Xianqing and Tian, Xiaoman and Guo, Zhengqi and Zhu, Deqing and Pan, Jian and Yang, Congcong and Li, Siwei},
title = {Preparation of High-Purity Nano-Iron Phosphate from Titanium-Extraction Tailings by Co-Leaching Synergetic Ultrasonic-Enhanced Precipitation Process},
journal = {Inorganic Chemistry},
year = {2024},
doi = {10.1021/acs.inorgchem.4c04229}
}
EUVIMED