EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Na 5/6 [Ni 1/3 Mn 1/6 Fe 1/6 Ti 1/3 ]O 2 as an Optimized O3-Type Layered Oxide Positive Electrode Material for Sodium-Ion Batteries

Koichi Hashimoto, Kei Kubota iD, Ryoichi Tatara iD, Tomooki Hosaka iD, Shinichi Komaba iD

Inorganic Chemistry · 09.12.2024 · 63 (49) · 23317-23327

DOI: 10.1021/acs.inorgchem.4c04001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Inorganic Chemistry, online erschienen am 26.11.2024. Verfasst von Koichi Hashimoto und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Chemistry, Tokyo University of Science, 1-3 Kagurazaka, Shinjuku, Tokyo 162-8601, Japan. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Culture, Sports, Science and Technology, Core Research for Evolutional Science and Technology, Precursory Research for Embryonic Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Layered oxides, such as NaxMeO2 (Me = transition metal, x = 0-1), are believed to be the most promising positive electrode materials for Na-ion batteries because of their high true density, large capacities, high working potentials, and reversibility. This study identified Na5/6[Ni1/3Mn1/6Fe1/6Ti1/3]O2 as an optimal composition for use as an O3-type positive electrode material in Na-ion batteries on the basis of a comprehensive phase diagram, where the end members of the triangular phase diagram were Na2/3[Ni1/32+Mn2/34+]O2, Na2/3[Ni1/32+Ti2/34+]O2, and the hypothetical composition Na4/3[Ni1/32+Fe2/33+]O2. By investigating the effects of the partial substitution of Mn4+ with Fe3+ and Ti4+ within the Na(2/3+x)[Ni1/3Mn(2/3-x-y)FexTiy]O2 system, we optimized the capacity, working potential, and cycle performance. Substitution with Fe enhanced the discharge capacity due to the increased Na+ content in the initial composition, although it also led to a reduced cycling stability derived from irreversible Fe migration to the Na layers. In contrast, substitution with Ti improved the working potential and cycling stability, although an excessive Ti content caused capacity degradation with cycling. We found that the O3-type Na5/6[Ni1/3Mn1/6Fe1/6Ti1/3]O2 demonstrated an excellent cycle stability with minimal capacity loss over 250 cycles, which was attributed to the suppression of irreversible transition metal migration.

Autor:innen und Institutionen

  • Department of Applied Chemistry, Tokyo University of Science, 1-3 Kagurazaka, Shinjuku, Tokyo 162-8601, Japan.

ORCID-Profile: Kei Kubota, Ryoichi Tatara, Tomooki Hosaka, Shinichi Komaba

Förderung

  • Ministry of Education, Culture, Sports, Science and Technology
  • Core Research for Evolutional Science and Technology
  • Precursory Research for Embryonic Science and Technology
  • Japan Society for the Promotion of Science
  • Japan Science and Technology Agency
  • Japan Science and Technology Corporation

Zitieren

APA

Hashimoto, K., Kubota, K., Tatara, R., Hosaka, T., & Komaba, S. (2024). Na 5/6 [Ni 1/3 Mn 1/6 Fe 1/6 Ti 1/3 ]O 2 as an Optimized O3-Type Layered Oxide Positive Electrode Material for Sodium-Ion Batteries. Inorganic Chemistry, 63(49), 23317-23327. https://doi.org/10.1021/acs.inorgchem.4c04001

Vancouver

Hashimoto K, Kubota K, Tatara R, Hosaka T, Komaba S. Na 5/6 [Ni 1/3 Mn 1/6 Fe 1/6 Ti 1/3 ]O 2 as an Optimized O3-Type Layered Oxide Positive Electrode Material for Sodium-Ion Batteries. Inorganic Chemistry. 2024;63(49):23317-23327. doi:10.1021/acs.inorgchem.4c04001

BibTeX
@article{Hashimoto2024,
  author = {Hashimoto, Koichi and Kubota, Kei and Tatara, Ryoichi and Hosaka, Tomooki and Komaba, Shinichi},
  title = {Na 5/6 [Ni 1/3 Mn 1/6 Fe 1/6 Ti 1/3 ]O 2 as an Optimized O3-Type Layered Oxide Positive Electrode Material for Sodium-Ion Batteries},
  journal = {Inorganic Chemistry},
  year = {2024},
  volume = {63},
  number = {49},
  pages = {23317--23327},
  doi = {10.1021/acs.inorgchem.4c04001}
}
Kostenlos starten →