Shape-Stabilized Silica Aerogel Particles Enable Thermal Insulating Mud Cakes for Drilling Fluid Cooling in Ultradeep Wells
Industrial & Engineering Chemistry Research · 16.11.2026
DOI: 10.1021/acs.iecr.6c04237 ↗Kurz gefasst
Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 16.11.2026. Verfasst von Yang Ding und 9 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Gefördert von: Jiangsu Provincial Department of Education, Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.
Abstract (Originalsprache)
During ultradeep well drilling, elevated formation temperatures transfer heat to the wellbore, leading to an increase in wellbore temperature that can subsequently cause drilling fluid degradation, tool failure, and a range of related issues. Consequently, reducing the wellbore temperature is critical to ensuring safe and efficient drilling operations. Here, an electrospray-assisted strategy is reported to fabricate shape-stabilized silica aerogel particles (SAPs) featuring a dense outer shell and a porous interior, specifically designed for thermal insulation in water-based drilling fluids. Unlike pristine silica aerogels, which are mechanically fragile and prone to pore collapse under high shear, the engineered SAPs maintain a high specific surface area (187 m2/g) and low thermal conductivity (0.073 W/m·K) while exhibiting enhanced structural stability. When incorporated into drilling fluids, SAPs reduce the thermal conductivity of the deposited mud cake to 0.559 W/m·K. Infrared imaging experiments further demonstrate that the equilibrium temperature of the mud cake containing 2 wt % SAPs (SAPMC-2) is 7.8 °C lower than that of the unmodified mud cake. To evaluate the potential cooling performance under downhole conditions, numerical simulations incorporating coupled heat transfer between the wellbore and surrounding formation are conducted. The results predict that a 3 mm thick SAPMC-2 layer can reduce the downhole drilling-fluid temperature by up to 7.29 °C. Moreover, the cooling performance of SAPMC-2 can be tailored by adjusting drilling-fluid displacement, geothermal gradient, and mud-cake thickness, whereas the inlet temperature has a negligible effect. SAPs also exhibit excellent compatibility with drilling fluids. These findings demonstrate the potential of SAPs as thermal-insulating agents in drilling fluids and offer a promising strategy for improving wellbore thermal management and operational efficiency in deep and ultradeep drilling operations.
Förderung
- Jiangsu Provincial Department of Education
- Fundamental Research Funds for the Central Universities
- National Natural Science Foundation of China
- National Science and Technology Major Project
Zitieren
APA
Ding, Y., Liu, Z., Zheng, L., Xu, G., Lv, K., Sun, J., Liu, C., Wang, J., Shi, J., & Li, M. (2026). Shape-Stabilized Silica Aerogel Particles Enable Thermal Insulating Mud Cakes for Drilling Fluid Cooling in Ultradeep Wells. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/acs.iecr.6c04237
Vancouver
Ding Y, Liu Z, Zheng L, Xu G, Lv K, Sun J, et al. Shape-Stabilized Silica Aerogel Particles Enable Thermal Insulating Mud Cakes for Drilling Fluid Cooling in Ultradeep Wells. Industrial & Engineering Chemistry Research. 2026. doi:10.1021/acs.iecr.6c04237
BibTeX
@article{Ding2026,
author = {Ding, Yang and Liu, Ziqing and Zheng, Lin and Xu, Guiqin and Lv, Kaihe and Sun, Jinsheng and Liu, Chaozheng and Wang, Jiangshuai and Shi, Jinan and Li, Mei-Chun},
title = {Shape-Stabilized Silica Aerogel Particles Enable Thermal Insulating Mud Cakes for Drilling Fluid Cooling in Ultradeep Wells},
journal = {Industrial & Engineering Chemistry Research},
year = {2026},
doi = {10.1021/acs.iecr.6c04237}
}
EUVIMED