Sonication-Driven Liberation of Lignin-Rich Fragments Enabled by Surface-Active Additives
Industrial & Engineering Chemistry Research · 04.11.2026 · 65 (43) · 23206-23210
DOI: 10.1021/acs.iecr.6c04197 ↗Kurz gefasst
Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 26.10.2026. Verfasst von Katri S. Kontturi und 2 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Business Finland.
Abstract (Originalsprache)
Wood delignification is typically achieved by chemical pulping and bleaching, but lignin removal can also be viewed as a dispersion challenge in which lignin-rich fragments are stabilized in the liquid phase. Here, we present a proof-of-concept for additive-assisted lignin liberation from disc-refined spruce fibers using controlled-energy sonication. Sodium dodecyl sulfate (SDS) and carboxymethyl cellulose (CMC) were used as representative surfactant and polyelectrolyte additives. Lignin release was quantified from filtrates by UV absorbance at 280 nm. Sonication alone caused negligible additional lignin release at 23 °C, whereas increasing pH or temperature increased release. Both SDS and CMC increased the filtrate lignin concentration by ∼12%–50%, relative to additive-free references (condition-dependent), although the overall detached fraction remained low (≤4.5% of total lignin), highlighting dispersion stabilization as a lever for lignin release under shear. Low ionic strength appeared beneficial for lignin liberation via dispersion formation.
Förderung
- Business Finland
Zitieren
APA
Kontturi, K. S., Kalliola, A., & Orelma, H. (2026). Sonication-Driven Liberation of Lignin-Rich Fragments Enabled by Surface-Active Additives. Industrial & Engineering Chemistry Research, 65(43), 23206-23210. https://doi.org/10.1021/acs.iecr.6c04197
Vancouver
Kontturi KS, Kalliola A, Orelma H. Sonication-Driven Liberation of Lignin-Rich Fragments Enabled by Surface-Active Additives. Industrial & Engineering Chemistry Research. 2026;65(43):23206-23210. doi:10.1021/acs.iecr.6c04197
BibTeX
@article{Kontturi2026,
author = {Kontturi, Katri S. and Kalliola, Anna and Orelma, Hannes},
title = {Sonication-Driven Liberation of Lignin-Rich Fragments Enabled by Surface-Active Additives},
journal = {Industrial & Engineering Chemistry Research},
year = {2026},
volume = {65},
number = {43},
pages = {23206--23210},
doi = {10.1021/acs.iecr.6c04197}
}
EUVIMED