Direct Ink Writing of Bismuth Oxide-Doped Epoxy Composites for Gamma-Ray Attenuation and Customized Shield Fabrication
Industrial & Engineering Chemistry Research · 16.11.2026
DOI: 10.1021/acs.iecr.6c04186 ↗Kurz gefasst
Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 16.11.2026. Verfasst von Kunal Mondal und 6 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben.
Abstract (Originalsprache)
Lead-free epoxy composites containing 0–35 vol % bismuth oxide (Bi2O3) were fabricated by direct ink writing. The inks contained Epon 826, 2-ethyl-4-methylimidazole, and fumed silica. Density, Vickers hardness, optical microstructure, dimensional fidelity, and photon attenuation were evaluated using 57Co, 137Cs, and 60Co gamma sources. Measured density increased from 1.09 ± 0.03 g cm–3 for the unfilled epoxy to 3.840 ± 0.009 g cm–3 at 35 vol % Bi2O3. Attenuation increased most strongly at 122 keV. Print records showed that the 30 vol % formulation extruded at a flow multiplier of 1 without a reported printing failure, whereas the 35 vol % ink became too thick to extrude during one run. The 30 vol % formulation was therefore selected for a fitted prototype plate. The installed plate demonstrates fabrication and fit; postinstallation leakage attenuation was not measured.
Zitieren
APA
Mondal, K., Vandergriff, M., Naicker, H., Smith, J. R., Wakeland, T., Zhao, X., & Advincula, R. C. (2026). Direct Ink Writing of Bismuth Oxide-Doped Epoxy Composites for Gamma-Ray Attenuation and Customized Shield Fabrication. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/acs.iecr.6c04186
Vancouver
Mondal K, Vandergriff M, Naicker H, Smith JR, Wakeland T, Zhao X, et al. Direct Ink Writing of Bismuth Oxide-Doped Epoxy Composites for Gamma-Ray Attenuation and Customized Shield Fabrication. Industrial & Engineering Chemistry Research. 2026. doi:10.1021/acs.iecr.6c04186
BibTeX
@article{Mondal2026,
author = {Mondal, Kunal and Vandergriff, Madison and Naicker, Hari and Smith, James Riley and Wakeland, Trevor and Zhao, Xingang and Advincula, Rigoberto C.},
title = {Direct Ink Writing of Bismuth Oxide-Doped Epoxy Composites for Gamma-Ray Attenuation and Customized Shield Fabrication},
journal = {Industrial & Engineering Chemistry Research},
year = {2026},
doi = {10.1021/acs.iecr.6c04186}
}
EUVIMED