Techno-Economic and Life Cycle Assessment of Hybrid Hollow-Fiber Membrane Contactor Configurations for Postcombustion CO2 Capture Integrated into Power Generation
Industrial & Engineering Chemistry Research · 18.11.2026
DOI: 10.1021/acs.iecr.6c03659 ↗Kurz gefasst
Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 18.11.2026. Verfasst von Alexandru-Constantin Bozonc und 4 weiteren Autor:innen. Die Arbeit nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Unitatea Executiva pentru Finantarea Invatamantului Superior, a Cercetarii, Dezvoltarii si Inovarii.
Abstract (Originalsprache)
This study evaluates two hybrid postcombustion CO2 capture configurations and benchmarks them against a net 1000 MW supercritical coal-fired power plant without carbon capture. Case 2 integrates HFMC-based absorption with thermal regeneration in Mellapak structured packing, while case 3 combines Mellapak absorption with vacuum-assisted HFMC regeneration. Detailed absorber and desorber models were developed in MATLAB/Simulink and coupled in Aspen Plus full-plant flowsheets to ensure consistent mass and energy balances, achieving a 90% capture rate. Among the captured assessed systems, case 3 shows the best technical performance, reaching an electrical efficiency of 35.35% and reducing SPECCA to 2.17 MJ/kg CO2, compared with 3.77 MJ/kg CO2 for case 2. Economically, case 3 also provides the lowest levelized cost of electricity, 100.33 €/MWh, and CO2 avoidance cost, 57.50 €/t CO2. The cradle-to-gate Life Cycle Assessment indicates an approximately 74% reduction in global warming potential, although increases occur in other impact categories when competed with the benchmark noncapture configuration, highlighting the trade-offs associated with deep decarbonization. Overall, the results demonstrate that membrane-based regeneration strategies can significantly enhance energy efficiency, together with economic and environmental performance of postcombustion CO2 capture.
Förderung
- Unitatea Executiva pentru Finantarea Invatamantului Superior, a Cercetarii, Dezvoltarii si Inovarii
Zitieren
APA
Bozonc, A., Cormos, C., Petrescu, L., Dragan, S., & Cormos, A. (2026). Techno-Economic and Life Cycle Assessment of Hybrid Hollow-Fiber Membrane Contactor Configurations for Postcombustion CO2 Capture Integrated into Power Generation. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/acs.iecr.6c03659
Vancouver
Bozonc A, Cormos C, Petrescu L, Dragan S, Cormos A. Techno-Economic and Life Cycle Assessment of Hybrid Hollow-Fiber Membrane Contactor Configurations for Postcombustion CO2 Capture Integrated into Power Generation. Industrial & Engineering Chemistry Research. 2026. doi:10.1021/acs.iecr.6c03659
BibTeX
@article{Bozonc2026,
author = {Bozonc, Alexandru-Constantin and Cormos, Calin-Cristian and Petrescu, Letitia and Dragan, Simion and Cormos, Ana-Maria},
title = {Techno-Economic and Life Cycle Assessment of Hybrid Hollow-Fiber Membrane Contactor Configurations for Postcombustion CO2 Capture Integrated into Power Generation},
journal = {Industrial & Engineering Chemistry Research},
year = {2026},
doi = {10.1021/acs.iecr.6c03659}
}
EUVIMED