Tuning Silver-Based Catalysts for Ozonative Ethylene Epoxidation at Room Temperature: Effects of Support Material and Calcination Temperature
Industrial & Engineering Chemistry Research · 18.11.2026
DOI: 10.1021/acs.iecr.6c03499 ↗Kurz gefasst
Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 18.11.2026. Verfasst von Pezhman Zolfaghari und 2 weiteren Autor:innen. Die Arbeit nennt 122 Literaturangaben. Gefördert von: University of Saskatchewan, Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
Ozonative epoxidation of ethylene offers a promising low-temperature route to ethylene oxide (EO) production, yet the catalyst design principles governing selectivity under ozonative conditions remain poorly understood. This work shows that the support material and calcination temperature of silver-based catalysts strongly influence EO selectivity through the silver oxidation state, dispersion, and metal–support interaction. Among α-Al2O3, γ-Al2O3, and rutile TiO2-supported catalysts, rutile TiO2 achieves the highest EO selectivity (60.3%), attributed to an electronic metal–support interaction (EMSI) that keeps the surface silver metallic, evidenced by a 0.3 eV support-induced shift of the Ag 3d peak at a metallic Auger parameter, together with the low surface area, acidity and hydroxyl density of rutile that suppress nonselective pathways. γ-Al2O3 promotes the highest ethylene conversion (36.6%) through superior silver dispersion, while α-Al2O3 gives the lowest conversion and selectivity. Optimization of calcination temperature on rutile TiO2-supported catalyst shows that EO selectivity is maintained between 500 and 600 °C, with the highest mean values for the 600 °C sample and declines significantly at 700 °C. Mechanistic analysis suggests that electrophilic oxygen derived from catalytic ozone decomposition drives an oxametallacycle-type epoxidation pathway, which competes with ozonolysis and reactive oxygen species-mediated combustion routes. O2-TPD suggests that the rutile TiO2-supported catalyst retains a larger reservoir of strongly bound interfacial or lattice oxygen and fewer weakly bound surface oxygen species that form reactive oxygen species (ROS). Overall, the results show that tuning the electronic interaction between silver and the support to stabilize metallic Ag and control interfacial oxygen species is a powerful strategy to maximize EO selectivity in room-temperature ozonative epoxidation.
Förderung
- University of Saskatchewan
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Zolfaghari, P., Payan, A., & Soltan, J. (2026). Tuning Silver-Based Catalysts for Ozonative Ethylene Epoxidation at Room Temperature: Effects of Support Material and Calcination Temperature. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/acs.iecr.6c03499
Vancouver
Zolfaghari P, Payan A, Soltan J. Tuning Silver-Based Catalysts for Ozonative Ethylene Epoxidation at Room Temperature: Effects of Support Material and Calcination Temperature. Industrial & Engineering Chemistry Research. 2026. doi:10.1021/acs.iecr.6c03499
BibTeX
@article{Zolfaghari2026,
author = {Zolfaghari, Pezhman and Payan, Amir and Soltan, Jafar},
title = {Tuning Silver-Based Catalysts for Ozonative Ethylene Epoxidation at Room Temperature: Effects of Support Material and Calcination Temperature},
journal = {Industrial & Engineering Chemistry Research},
year = {2026},
doi = {10.1021/acs.iecr.6c03499}
}
EUVIMED