Effect of Coblowing Agent on the Supercritical CO2 Foaming Behavior of Polyvinyl Chloride: Induced Plasticization, Regulated Gelation, and Enhanced Mechanical Performance
Industrial & Engineering Chemistry Research · 19.08.2026 · 65 (32) · 17249-17264
DOI: 10.1021/acs.iecr.6c03008 ↗Kurz gefasst
Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 10.08.2026. Verfasst von Haonan Chen und 6 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Ministry of Education of the People's Republic of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
This work investigates the effects of coblowing agents (n-pentane, methyl acetate, n-butanol, and propionic acid) on the plasticization, gelation degree, and foaming behavior of polyvinyl chloride (PVC) using supercritical CO2. The results demonstrate that coblowing agents exhibit excellent plasticizing effects and a remarkable capacity to regulate the gelation degree of PVC. Specifically, the CO2/propionic acid system decreases the glass transition temperature (Tg) of PVC by 19.8 °C while simultaneously increasing the gelation degree by 20.3%. The introduction of coblowing agents enhances apparent blowing-agent solubility and decreases the gas apparent desorption diffusion coefficient. The enhanced plasticization significantly lowers the initial and optimal foaming temperatures by 10 and 20 °C, respectively. Under the optimized gelation degree and processing conditions, the expansion ratio increases from 11.1 to 16.5. For foams with an expansion ratio of approximately 10, the compressive strength and compressive modulus of the foam prepared using the CO2/propionic acid system increase by 123.3 and 294.4%, respectively. In summary, modulating the polarity of coblowing agents and their interactions with the polymer matrix not only effectively broadens the processing window but also provides a viable strategy for fabricating high-expansion and high-performance PVC foams.
Förderung
- National Natural Science Foundation of China
- Ministry of Education of the People's Republic of China
- Fundamental Research Funds for the Central Universities
- Higher Education Discipline Innovation Project
Zitieren
APA
Chen, H., Gao, X., Niu, C., Zhang, X., Chen, Y., Zhao, L., & Hu, D. (2026). Effect of Coblowing Agent on the Supercritical CO2 Foaming Behavior of Polyvinyl Chloride: Induced Plasticization, Regulated Gelation, and Enhanced Mechanical Performance. Industrial & Engineering Chemistry Research, 65(32), 17249-17264. https://doi.org/10.1021/acs.iecr.6c03008
Vancouver
Chen H, Gao X, Niu C, Zhang X, Chen Y, Zhao L, et al. Effect of Coblowing Agent on the Supercritical CO2 Foaming Behavior of Polyvinyl Chloride: Induced Plasticization, Regulated Gelation, and Enhanced Mechanical Performance. Industrial & Engineering Chemistry Research. 2026;65(32):17249-17264. doi:10.1021/acs.iecr.6c03008
BibTeX
@article{Chen2026,
author = {Chen, Haonan and Gao, Xiulu and Niu, Chenyang and Zhang, Xuelin and Chen, Yichong and Zhao, Ling and Hu, Dongdong},
title = {Effect of Coblowing Agent on the Supercritical CO2 Foaming Behavior of Polyvinyl Chloride: Induced Plasticization, Regulated Gelation, and Enhanced Mechanical Performance},
journal = {Industrial & Engineering Chemistry Research},
year = {2026},
volume = {65},
number = {32},
pages = {17249--17264},
doi = {10.1021/acs.iecr.6c03008}
}
EUVIMED