EUVIMEDEUVIMED entdecken
Crossref

Catalyst-Free Thiol–Yne Click Polymerization-Induced Autophotosensitive Polyimide for Negative Lithography

Tianyuan Xu, Zhao Liu, Junjian Xie, Shuyu Xue, Xiaoming Ren, Yunfei Liu, Qiangqiang Zhu, Yu Shen, Qiuyu Zhang

Industrial & Engineering Chemistry Research · 05.08.2026 · 65 (30) · 16337-16344

DOI: 10.1021/acs.iecr.6c02475 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 27.07.2026. Verfasst von Tianyuan Xu und 8 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Gefördert von: Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China, National Energy Research and Development Center of Petroleum Refining Technology (RIPP, SINOPEC).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Photosensitive polyimide (PSPI) is widely used as a protective and insulating layer in electronic components, attracting considerable interest in semiconductor manufacturing and optoelectronics. However, conventional PSPIs often face challenges such as complex monomer synthesis, lengthy processing, high imidization temperatures, and inadequate mechanical properties. In this work, a soluble polyimide (FAT) containing main-chain double bonds was rapidly synthesized within 2 h via catalyst-free thiol–yne click reaction at room temperature. This intrinsic negative-tone photosensitive system cross-links through its double bonds under light, eliminating the need for photoinitiators or high-temperature imidization. The FAT polyimide enables high-resolution patterning up to 4 μm. After exposure at 50 J/cm2, the film exhibits a glass transition temperature (Tg) of 217 °C, a decomposition temperature (Td5%) of 361 °C, a tensile strength of 108.1 MPa, and an elongation at break of 15.1%. It also demonstrates good optical transparency, with a UV cutoff at 377 nm and transmittances of 67.8% at 450 nm and 80.2% at 550 nm. Therefore, the synthesized FAT polyimide represents a promising candidate for high-resolution insulation layers and advanced microelectronics packaging.

Förderung

  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China
  • National Energy Research and Development Center of Petroleum Refining Technology (RIPP, SINOPEC)

Zitieren

APA

Xu, T., Liu, Z., Xie, J., Xue, S., Ren, X., Liu, Y., Zhu, Q., Shen, Y., & Zhang, Q. (2026). Catalyst-Free Thiol–Yne Click Polymerization-Induced Autophotosensitive Polyimide for Negative Lithography. Industrial & Engineering Chemistry Research, 65(30), 16337-16344. https://doi.org/10.1021/acs.iecr.6c02475

Vancouver

Xu T, Liu Z, Xie J, Xue S, Ren X, Liu Y, et al. Catalyst-Free Thiol–Yne Click Polymerization-Induced Autophotosensitive Polyimide for Negative Lithography. Industrial & Engineering Chemistry Research. 2026;65(30):16337-16344. doi:10.1021/acs.iecr.6c02475

BibTeX
@article{Xu2026,
  author = {Xu, Tianyuan and Liu, Zhao and Xie, Junjian and Xue, Shuyu and Ren, Xiaoming and Liu, Yunfei and Zhu, Qiangqiang and Shen, Yu and Zhang, Qiuyu},
  title = {Catalyst-Free Thiol–Yne Click Polymerization-Induced Autophotosensitive Polyimide for Negative Lithography},
  journal = {Industrial & Engineering Chemistry Research},
  year = {2026},
  volume = {65},
  number = {30},
  pages = {16337--16344},
  doi = {10.1021/acs.iecr.6c02475}
}
Kostenlos starten →