EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microwave-Assisted Plastic Upcycling: Dynamic Data Reconciliation, Parameter Estimation, and Kinetic Modeling

Harish Damahe, Md Emdadul Haque, Chunlin Luo, Yuxin Wang iD, Jianli Hu iD, Debangsu Bhattacharyya iD

Industrial & Engineering Chemistry Research · 15.07.2026 · 65 (27) · 14461-14471

DOI: 10.1021/acs.iecr.6c01330 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 02.07.2026. Verfasst von Harish Damahe und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biomedical Engineering, West Virginia University, Morgantown, West Virginia 26506, United States. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microwave (MW)-assisted catalytic pyrolysis offers a promising pathway for efficient plastic upcycling. This work develops an integrated modeling framework combining dynamic data reconciliation, a temperature-dependent rate model, and a yield model to represent the time-varying production rate of components in MW-assisted LDPE pyrolysis conducted in a batch reactor. An Arrhenius-type rate model with a temperature-dependent reaction order is developed. A biexponential correlation is proposed for the yield of gaseous products that enables to capture the evolving product formation behavior during conversion. In the yield correlation, one term is used to represent the initial increase in yield, reflecting the rapid formation of intermediate or primary products at the early stages of the reaction when a larger fraction of the reactant remains available. As conversion progresses, the influence of this term gradually diminishes. The other term accounts for the subsequent decrease in the predicted yield, representing secondary reactions such as further cracking or coke formation that reduce the concentration of certain products at higher conversion. The model is found to accurately represent reconciled experimental flow rate profiles from an in-house MW-assisted catalytic batch reactor for major products, including ethylene, ethane, 1-butene, and benzene, across 250-350 °C. Ethylene remains the dominant product but decreases from about 41.95% at 250 °C to 30.14% at 350 °C, while heavier products increase significantly, with 1-butene rising to nearly 8.37% and benzene reaching 2.17% at intermediate temperatures. The model shows that the ethylene production rate can be maximized at around 270 °C. The models developed in this work can be utilized for process optimization, reactor design and scale-up of microwave-assisted plastic conversion technologies, and economic analysis.

Autor:innen und Institutionen

  • Department of Chemical and Biomedical Engineering, West Virginia University, Morgantown, West Virginia 26506, United States.

ORCID-Profile: Yuxin Wang, Jianli Hu, Debangsu Bhattacharyya

Förderung

  • U.S. Department of Energy

Zitieren

APA

Damahe, H., Haque, M. E., Luo, C., Wang, Y., Hu, J., & Bhattacharyya, D. (2026). Microwave-Assisted Plastic Upcycling: Dynamic Data Reconciliation, Parameter Estimation, and Kinetic Modeling. Industrial & Engineering Chemistry Research, 65(27), 14461-14471. https://doi.org/10.1021/acs.iecr.6c01330

Vancouver

Damahe H, Haque ME, Luo C, Wang Y, Hu J, Bhattacharyya D. Microwave-Assisted Plastic Upcycling: Dynamic Data Reconciliation, Parameter Estimation, and Kinetic Modeling. Industrial & Engineering Chemistry Research. 2026;65(27):14461-14471. doi:10.1021/acs.iecr.6c01330

BibTeX
@article{Damahe2026,
  author = {Damahe, Harish and Haque, Md Emdadul and Luo, Chunlin and Wang, Yuxin and Hu, Jianli and Bhattacharyya, Debangsu},
  title = {Microwave-Assisted Plastic Upcycling: Dynamic Data Reconciliation, Parameter Estimation, and Kinetic Modeling},
  journal = {Industrial & Engineering Chemistry Research},
  year = {2026},
  volume = {65},
  number = {27},
  pages = {14461--14471},
  doi = {10.1021/acs.iecr.6c01330}
}
Kostenlos starten →