High-Performing Vacuum-Pressure Swing Adsorption Unit for Drying Hydrogen from Water Electrolysis
Industrial & Engineering Chemistry Research · 19.08.2026 · 65 (32) · 17315-17332
DOI: 10.1021/acs.iecr.6c00750 ↗Kurz gefasst
Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 04.08.2026. Verfasst von Tiago M R Santos und 3 weiteren Autor:innen. Beteiligte Einrichtung: LEPABE - Laboratory for Process Engineering, Environment, Biotechnology and Energy, Faculty of Engineering, University of Porto, Rua Dr. Roberto Fria…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission, NextGenerationEU, Funda??o para a Ci?ncia e a Tecnologia.
Abstract (Originalsprache)
The growing demand for ultrapure hydrogen in fuel cell applications requires the development of efficient and cost-effective purification technologies. This study reports the development, optimization, and techno-economic assessment of a vacuum-pressure swing adsorption (VPSA) system for hydrogen drying in compliance with the ISO 14687-2 standard. Activated alumina was employed as the adsorbent, and experimental validation demonstrated a reduction in water content to dew points below −65.5 °C, with a concentration of 5 μmol of H2O per mol of H2. Adsorption isotherms for hydrogen and water were measured and modeled using the Langmuir and Toth-Aranovich-Donohue equations. Several regeneration strategies were evaluated, with the combined application of vacuum and purge gas identified as the most effective. A Box-Behnken response surface methodology was employed to optimize operating parameters, and the optimal conditions were experimentally validated. Under these conditions, the VPSA achieved a hydrogen recovery of 98.98%, a productivity of 3.92 kgH2·kgads–1·cycle–1, and a dew point of −66.76 °C. A techno-economic analysis of a hypothetical unit producing 300 kg·h–1 of hydrogen, scaled from laboratory data, demonstrated the economic feasibility of the VPSA process. When hydrogen was fed in a compressed state at 7.34 bar, the additional specific energy consumption and cost associated with the purification step were estimated at 0.038 kWh·kg–1 and 0.039 €·kg–1 of H2, respectively. These results highlight the VPSA system as a promising solution for high-purity hydrogen drying, combining robust operational performance with strong economic viability.
Autor:innen und Institutionen
- LEPABE - Laboratory for Process Engineering, Environment, Biotechnology and Energy, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, Porto 4200-465, Portugal.
- ALiCE - Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, Porto 4200-465, Portugal.
- Amnis Pura, Parque Empresarial Laborim, 100, Armazém C3, Vila Nova de Gaia 4430-246, Portugal.
- Departamento de Química - Escola de Ciências da Vida E Do Ambiente, Universidade de Trás-os-Montes e Alto Douro, Vila-Real 5001-911, Portugal.
ORCID-Profile: Adélio Mendes
Förderung
- European Commission
- NextGenerationEU
- Funda??o para a Ci?ncia e a Tecnologia
Zitieren
APA
R Santos, T. M., Sousa, J. M., Relvas, F., & Mendes, A. (2026). High-Performing Vacuum-Pressure Swing Adsorption Unit for Drying Hydrogen from Water Electrolysis. Industrial & Engineering Chemistry Research, 65(32), 17315-17332. https://doi.org/10.1021/acs.iecr.6c00750
Vancouver
R Santos TM, Sousa JM, Relvas F, Mendes A. High-Performing Vacuum-Pressure Swing Adsorption Unit for Drying Hydrogen from Water Electrolysis. Industrial & Engineering Chemistry Research. 2026;65(32):17315-17332. doi:10.1021/acs.iecr.6c00750
BibTeX
@article{RSantos2026,
author = {R Santos, Tiago M and Sousa, José M and Relvas, Frederico and Mendes, Adélio},
title = {High-Performing Vacuum-Pressure Swing Adsorption Unit for Drying Hydrogen from Water Electrolysis},
journal = {Industrial & Engineering Chemistry Research},
year = {2026},
volume = {65},
number = {32},
pages = {17315--17332},
doi = {10.1021/acs.iecr.6c00750}
}
EUVIMED