EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Vortex-Based Cavitation Devices for Continuous Emulsification: Influence of the Device Design, Scale-Up, and Scale-Out

Amol Gode iD, Kyriakos Kourousis iD, Vivek V Ranade iD

Industrial & Engineering Chemistry Research · 22.04.2026 · 65 (15) · 8081-8101

DOI: 10.1021/acs.iecr.6c00278 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 08.04.2026. Verfasst von Amol Gode und 2 weiteren Autor:innen. Beteiligte Einrichtung: Multiphase Reactors and Intensification Group Bernal Institute, University of Limerick, Limerick V94T9PX, Ireland. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Foundation Ireland.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Continuous emulsification is a desirable alternative to batch processing, especially in sectors such as food and beverage, cosmetics, and pharmaceuticals, where large volumes of consistent emulsions are required. Vortex-based hydrodynamic cavitation (VD) devices have emerged as efficient and scalable options using cavitation-induced local energy dissipation to promote droplet breakup. However, practical guidance for device design and pathways for scale-up and scale-out remains limited. This study investigates the influence of the outlet configuration, chamber geometry, number of inlets, and scale-up or scale-out on the performance of VD for continuous production of liquid-liquid emulsions. The results indicate that including a vortex stabilizer in the chamber and using a multiple-inlet device improved the cavitation activity. Geometrically similar scale-up (1-5 LPM) resulted in a slight increase in the Sauter mean diameter and lower energy efficiency, which confirmed the flow characteristics related to the distribution of turbulence dissipation rates becoming attenuated at larger scales. The scale-out options were investigated considering two and four 1 LPM nominal flow rate devices operated in parallel to increase the nominal flow rate to 5 LPM for the four devices. The results confirm that while scale-up and scale-out have limited impact on final droplet size distribution, they influence energy effectiveness. Multi-inlet designs were seen to enhance emulsification efficiency and reduce droplet size, especially when operating at low pressure drop values. Overall, this study provides practical guidelines for designing and deploying vortex-based HC devices for continuous emulsification applications.

Autor:innen und Institutionen

  • Multiphase Reactors and Intensification Group Bernal Institute, University of Limerick, Limerick V94T9PX, Ireland.
  • School of Engineering, University of Limerick, Limerick V94T9PX, Ireland.

ORCID-Profile: Amol Gode, Kyriakos Kourousis, Vivek V Ranade

Förderung

  • Science Foundation Ireland

Zitieren

APA

Gode, A., Kourousis, K., & Ranade, V. V. (2026). Vortex-Based Cavitation Devices for Continuous Emulsification: Influence of the Device Design, Scale-Up, and Scale-Out. Industrial & Engineering Chemistry Research, 65(15), 8081-8101. https://doi.org/10.1021/acs.iecr.6c00278

Vancouver

Gode A, Kourousis K, Ranade VV. Vortex-Based Cavitation Devices for Continuous Emulsification: Influence of the Device Design, Scale-Up, and Scale-Out. Industrial & Engineering Chemistry Research. 2026;65(15):8081-8101. doi:10.1021/acs.iecr.6c00278

BibTeX
@article{Gode2026,
  author = {Gode, Amol and Kourousis, Kyriakos and Ranade, Vivek V},
  title = {Vortex-Based Cavitation Devices for Continuous Emulsification: Influence of the Device Design, Scale-Up, and Scale-Out},
  journal = {Industrial & Engineering Chemistry Research},
  year = {2026},
  volume = {65},
  number = {15},
  pages = {8081--8101},
  doi = {10.1021/acs.iecr.6c00278}
}
Kostenlos starten →