Evaluation of a Catalytic Cracking Reactor Operating in a Broad Conversion Range: Part II─Slurry Oil Recracking and FCC Unit Optimization
Industrial & Engineering Chemistry Research · 17.06.2026 · 65 (23) · 12251-12261
DOI: 10.1021/acs.iecr.6c00162 ↗Kurz gefasst
Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 03.06.2026. Verfasst von Leandro M. Silva und 5 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben.
Abstract (Originalsprache)
Fluid catalytic cracking (FCC) is a process that is typically driven toward LPG and naphtha production, but it also produces light cycle oil (LCO), a relevant middle-cut stream that can be incorporated into the diesel pool (provided that the severity of the diesel hydrotreating unit is sufficient to absorb the low-cetane-index LCO stream); thus, for market considerations, the FCC unit may be pushed to increase the LCO/naphtha production ratio. Operating the FCC in the maximum LCO mode requires careful optimization of process conditions to overcome the drawback of increased bottoms (slurry oil). The present work complements a previous one (in which an empirical model for the FCC yield profile exploring the low-conversion region was devised) by discussing the option of slurry oil recracking and an optimization study of the most profitable operating mode. A simplified empirical model for slurry oil cracking was developed from experimental data from a fixed fluidized-bed pilot plant using two samples of slurry oil originally produced at a large-scale FCC pilot plant: (a) from a high-conversion run (21.4 wt % yield of slurry oil) and (b) from a low-conversion run (35.5 wt % yield of slurry oil). The empirical models were coupled with a simplified process simulator and a constrained nonlinear optimization tool, and the evaluation performed indicated that operating the FCC unit at high conversion (thus in maximum naphtha mode) remains more profitable, particularly due to a relatively small increase in LCO yield compared to a large increase in slurry oil yield in maximum middle distillation mode. If any specific circumstance demands for a low-conversion operation in the FCC, the empirical model obtained showed that an ideal path to achieve a lower conversion would be to allow for slurry oil recycling, to keep a high reaction temperature and a high contact time between catalyst and cracked gaseous products in the riser, and to lessen severity through reducing the catalyst-to-oil ratio, e.g., by increasing feed temperature to the riser.
Zitieren
APA
Silva, L. M., Sandes, E. F., Gilbert, W. R., Morgado, E., Casavechia, L. C., & Alberton, A. L. (2026). Evaluation of a Catalytic Cracking Reactor Operating in a Broad Conversion Range: Part II─Slurry Oil Recracking and FCC Unit Optimization. Industrial & Engineering Chemistry Research, 65(23), 12251-12261. https://doi.org/10.1021/acs.iecr.6c00162
Vancouver
Silva LM, Sandes EF, Gilbert WR, Morgado E, Casavechia LC, Alberton AL. Evaluation of a Catalytic Cracking Reactor Operating in a Broad Conversion Range: Part II─Slurry Oil Recracking and FCC Unit Optimization. Industrial & Engineering Chemistry Research. 2026;65(23):12251-12261. doi:10.1021/acs.iecr.6c00162
BibTeX
@article{Silva2026,
author = {Silva, Leandro M. and Sandes, Emanuel F. and Gilbert, William R. and Morgado, Edisson and Casavechia, Luiz C. and Alberton, Andre L.},
title = {Evaluation of a Catalytic Cracking Reactor Operating in a Broad Conversion Range: Part II─Slurry Oil Recracking and FCC Unit Optimization},
journal = {Industrial & Engineering Chemistry Research},
year = {2026},
volume = {65},
number = {23},
pages = {12251--12261},
doi = {10.1021/acs.iecr.6c00162}
}
EUVIMED