CAU-10-H: Synthesis Scale-Up at the Pilot Scale, Techno-Economic Analysis, and Application in a Full-Scale Cooling System
Industrial & Engineering Chemistry Research · 08.04.2026 · 65 (13) · 7045-7055
DOI: 10.1021/acs.iecr.5c05308 ↗Kurz gefasst
Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 26.03.2026. Verfasst von Kalle S Mertin und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institut Für Anorganische Chemie, Christian-Albrechts-Universität zu Kiel, Kiel 24118, Germany. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission, Christian-Albrechts-Universit??t zu Kiel, Universit??t zu L??beck.
Abstract (Originalsprache)
Metal-organic frameworks (MOFs) offer a wide range of advantages for modern society. In particular, the growing societal challenges of energy consumption for cooling and water scarcity can be addressed by high-performance MOFs, such as CAU-10-H, Al-MIL-160, and MOF-303. To enable the application of MOFs, sustainable and large-scale production must be established. Here, we report the green, low-cost multikilogram scale-up of CAU-10-H in a pilot-scale batch reactor leading to 27.5 kg of dry MOF, corresponding to a space-time yield (STY) of 99 kg m-3 d-1. Based on the results, a techno-economic analysis was performed to estimate the production cost for a production process at a 1 kt scale. The scenario considered achieved a cost of 13.8 ± 2.8 $ kg-1 (2022 prices). Linker costs were identified as the main cost-driving parameter. Further optimization of the reaction conditions was performed on a 10 L scale, including solvent recycling and increased reaction concentration by a factor of 2. The latter resulted in a projected STY above 400 kg m-3 d-1 without compromising the MOF properties. The best-case scenario (STY = 481 kg m-3 d-1) leads to a reduction in production cost to 12.1 ± 2.4 $ kg-1. Water adsorption capacities and rates of CAU-10-H coatings were measured to evaluate their use in adsorption cooling (ADC). An adsorption chiller simulation showed clear benefits in cooling efficiency for air conditioning in moderate climates and engine heat-driven ship cooling by a factor of 3 against silica gel and a factor of 2 against SAPO-34, the current state-of the art material.
Autor:innen und Institutionen
- Institut Für Anorganische Chemie, Christian-Albrechts-Universität zu Kiel, Kiel 24118, Germany.
- CERENA, Departamento de Engenharia Química, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, Lisboa 1049-001, Portugal.
- CICECOAveiro Institute of Materials, Department of Chemistry, University of Aveiro, Campus Universitário de Santiago, Aveiro 3810-193, Portugal.
- SorCool GmbH, Zscherbener Landstraße 12, Halle 06126, Germany.
- Kiel Nano, Surface and Interface Science KiNSIS, Christian-Albrechts-Universität zu Kiel, Kiel 24118, Germany.
ORCID-Profile: Abeer Mohtar, Moisés L Pinto, Ralph Herrmann, Norbert Stock
Förderung
- European Commission
- Christian-Albrechts-Universit??t zu Kiel
- Universit??t zu L??beck
- Minist??rio da Educa????o e Ci??ncia
Zitieren
APA
Mertin, K. S., Mohtar, A., Bordonhos, M., Pinto, M. L., May, T., Herrmann, R., & Stock, N. (2026). CAU-10-H: Synthesis Scale-Up at the Pilot Scale, Techno-Economic Analysis, and Application in a Full-Scale Cooling System. Industrial & Engineering Chemistry Research, 65(13), 7045-7055. https://doi.org/10.1021/acs.iecr.5c05308
Vancouver
Mertin KS, Mohtar A, Bordonhos M, Pinto ML, May T, Herrmann R, et al. CAU-10-H: Synthesis Scale-Up at the Pilot Scale, Techno-Economic Analysis, and Application in a Full-Scale Cooling System. Industrial & Engineering Chemistry Research. 2026;65(13):7045-7055. doi:10.1021/acs.iecr.5c05308
BibTeX
@article{Mertin2026,
author = {Mertin, Kalle S and Mohtar, Abeer and Bordonhos, Marta and Pinto, Moisés L and May, Thomas and Herrmann, Ralph and Stock, Norbert},
title = {CAU-10-H: Synthesis Scale-Up at the Pilot Scale, Techno-Economic Analysis, and Application in a Full-Scale Cooling System},
journal = {Industrial & Engineering Chemistry Research},
year = {2026},
volume = {65},
number = {13},
pages = {7045--7055},
doi = {10.1021/acs.iecr.5c05308}
}
EUVIMED