EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thiol-Functionalized TiO 2 as Reactive Nanoadsorbents for Residual Monomer Removal from Waterborne Polymer Dispersions

Ana Trajcheva, Pablo Morales, Justine Elgoyhen, Radmila Tomovska iD

Industrial & Engineering Chemistry Research · 28.01.2026 · 65 (3) · 1483-1495

DOI: 10.1021/acs.iecr.5c04301 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 19.01.2026. Verfasst von Ana Trajcheva und 3 weiteren Autor:innen. Beteiligte Einrichtung: POLYMAT and Departamento de Química Aplicada, Facultad de Ciencias Químicas, University of the Basque Country UPV/EHU, Joxe Mari Korta Zentroa, Tolos…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia, Innovaci?n y Universidades, Eusko Jaurlaritza, Euskal Herriko Unibertsitatea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores the use of thiol-functionalized TiO2 nanoparticles to reduce residual methyl methacrylate (MMA) and butyl acrylate (BA) monomers in waterborne polymer dispersions (latexes). TiO2 nanoparticles were modified with (3-mercaptopropyl)-triethoxysilane (MPTES) to introduce -SH groups capable of thiol-ene type reaction with CC bonds of monomers. The effects of functionalization density, nanoparticle concentration, and mixing time on monomer removal were systematically evaluated. Compared with unmodified TiO2, MPTES-modified nanoparticles achieved up to 90% removal of MMA and nearly complete removal of BA, lowering total residual monomer content from ∼1900 ppm to 120 ppm. About 80-90% of the adsorbed monomers were chemically, thus, irreversibly bonded to the TiO2 surface. DLS, TEM, and zeta potential analyses revealed improved dispersion and reduced aggregation of modified nanoparticles in the latex, leading to uniform distribution in films obtained by water evaporation. TEM imaging further showed preferential localization of modified TiO2 at the polymer particle surfaces, enabling efficient monomer capture while maintaining good dispersion. The resulting films displayed unchanged water sensitivity but significantly improved mechanical properties, with Young's modulus increasing by 75%. Overall, thiol-functionalized TiO2 nanoparticles act as reactive, multifunctional adsorbents that effectively reduce residual monomer content and enhance the mechanical performance of MMA/BA polymer latex coatings.

Autor:innen und Institutionen

  • POLYMAT and Departamento de Química Aplicada, Facultad de Ciencias Químicas, University of the Basque Country UPV/EHU, Joxe Mari Korta Zentroa, Tolosa Etorbidea 72, Donostia, San Sebastián 20018, Spain.
  • IKERBASQUE, Basque Foundation for Science, Plaza Euskadi 5, 48009 Bilbao, Spain.

ORCID-Profile: Radmila Tomovska

Förderung

  • Ministerio de Ciencia, Innovaci?n y Universidades
  • Eusko Jaurlaritza
  • Euskal Herriko Unibertsitatea
  • Industrial Liaison Program in Polymerization in Dispersed Media

Zitieren

APA

Trajcheva, A., Morales, P., Elgoyhen, J., & Tomovska, R. (2026). Thiol-Functionalized TiO 2 as Reactive Nanoadsorbents for Residual Monomer Removal from Waterborne Polymer Dispersions. Industrial & Engineering Chemistry Research, 65(3), 1483-1495. https://doi.org/10.1021/acs.iecr.5c04301

Vancouver

Trajcheva A, Morales P, Elgoyhen J, Tomovska R. Thiol-Functionalized TiO 2 as Reactive Nanoadsorbents for Residual Monomer Removal from Waterborne Polymer Dispersions. Industrial & Engineering Chemistry Research. 2026;65(3):1483-1495. doi:10.1021/acs.iecr.5c04301

BibTeX
@article{Trajcheva2026,
  author = {Trajcheva, Ana and Morales, Pablo and Elgoyhen, Justine and Tomovska, Radmila},
  title = {Thiol-Functionalized TiO 2 as Reactive Nanoadsorbents for Residual Monomer Removal from Waterborne Polymer Dispersions},
  journal = {Industrial & Engineering Chemistry Research},
  year = {2026},
  volume = {65},
  number = {3},
  pages = {1483--1495},
  doi = {10.1021/acs.iecr.5c04301}
}
Kostenlos starten →