EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling and Experiments on Multilayered Barrier Coatings Containing Water-Sorbent Biopolymers

Solomon Stavros Melides, Ian Williams, Joseph L Keddie iD

Industrial & Engineering Chemistry Research · 10.12.2025 · 64 (49) · 23471-23485

DOI: 10.1021/acs.iecr.5c04116 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 25.11.2025. Verfasst von Solomon Stavros Melides und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mathematics and Physics, University of Surrey, Guildford GU2 7XH, U.K. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Royal Society, University of Surrey.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Environmental regulations and consumer demand are driving the need for packaging materials to reduce or eliminate the use of petroleum-based plastics by replacing them with natural and degradable alternatives. Water flux through a barrier layer is governed by the differential in water activity between a high side (e.g., an aqueous solution) and a low side, such as humid air. We propose that a water-absorbent layer sandwiched between two barrier layers will act as a sponge and locally raise the water activity. It will thereby lower the activity differential across the first barrier layer and, hence, reduce the water flux through the multilayer for a set time period. We present a theoretical model that predicts the water flux through a multilayered structure of two or more barrier layers sandwiching hydrophilic layers that hold water according to an absorption isotherm. We use this model to evaluate the effects of layer thicknesses and distributions, the barrier permeability, the water-holding capacity, and initial water activity of the absorbent layers. We found that the water mass loss rate decreases when the thickness and water-holding capacity of the absorbent layer increase. The greatest reduction in the mass loss through a multilayer was achieved when the absorbent layer had an initial water activity of 0 (fully dried). The relative thicknesses of the barrier layers in the multilayer also have an impact on the water loss rate; thicker barrier layers on the low-activity side of the multilayer are the most effective in reducing the water flux. We have verified the model in an ideal system. We also investigated a multilayer structure of a waterborne emulsion polymer barrier coating and water-absorbing chitosan, which is a deacetylated form of chitin. Here, the chitosan layer offered little benefit in decreasing the water permeability because the layers were not thick enough and the permeability of the waterborne coating on its own is not sufficiently low. With our design concept for multilayer barriers containing absorbent layers and the underpinning theoretical model, we envisage materials systems with enhanced barrier properties while also using less petrochemically derived plastic.

Autor:innen und Institutionen

  • School of Mathematics and Physics, University of Surrey, Guildford GU2 7XH, U.K.

ORCID-Profile: Joseph L Keddie

Förderung

  • Engineering and Physical Sciences Research Council
  • Royal Society
  • University of Surrey
  • Innovate UK
  • Pulpex Ltd.

Zitieren

APA

Melides, S. S., Williams, I., & Keddie, J. L. (2025). Modeling and Experiments on Multilayered Barrier Coatings Containing Water-Sorbent Biopolymers. Industrial & Engineering Chemistry Research, 64(49), 23471-23485. https://doi.org/10.1021/acs.iecr.5c04116

Vancouver

Melides SS, Williams I, Keddie JL. Modeling and Experiments on Multilayered Barrier Coatings Containing Water-Sorbent Biopolymers. Industrial & Engineering Chemistry Research. 2025;64(49):23471-23485. doi:10.1021/acs.iecr.5c04116

BibTeX
@article{Melides2025,
  author = {Melides, Solomon Stavros and Williams, Ian and Keddie, Joseph L},
  title = {Modeling and Experiments on Multilayered Barrier Coatings Containing Water-Sorbent Biopolymers},
  journal = {Industrial & Engineering Chemistry Research},
  year = {2025},
  volume = {64},
  number = {49},
  pages = {23471--23485},
  doi = {10.1021/acs.iecr.5c04116}
}
Kostenlos starten →