EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable H 2 -Rich Syngas Production via Microwave-Assisted vs Conventional Catalysis of Pinewood

Kshitij Tewari iD, Devin Burton, Brandon Robinson, Changle Jiang iD, Debangsu Bhattacharyya iD, Jianli Hu iD

Industrial & Engineering Chemistry Research · 21.01.2026 · 65 (2) · 1059-1073

DOI: 10.1021/acs.iecr.5c02616 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 05.01.2026. Verfasst von Kshitij Tewari und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biomedical Engineering, West Virginia University, Morgantown, West Virginia 26505, United States. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Catalytic gasification of biomass is a promising method for producing hydrogen-rich syngas, which is a valuable resource for clean-energy applications. In this study, microwave-assisted biomass gasification was compared with conventional thermally driven biomass gasification using pinewood as the biomass without the use of external gasifying agents (such as air, steam, and CO2), under non-catalytic and catalytic conditions. The catalysts consisted of either an iron or a nickel catalyst, and the pinewood used as biomass contained 42% oxygen. This comparative analysis explores the differences in reaction chemistry, product yields, and the role of key reactions such as the water gas shift (WGS) reaction, Boudouard reaction, etc. The gas-phase and liquid-phase products were analyzed using online gas chromatography, and the fresh and spent catalysts were analyzed using X-ray diffraction (XRD) techniques. It was found that microwave-assisted gasification offers advantages in terms of enhanced reaction efficiency, catalyst stability, and hydrogen yield. For the microwave-assisted reaction, the gas yield reached 87%, the char yield was 12.1%, and the tar yield was less than 1% (0.793%) at 550 °C. In contrast, thermal-assisted gasification using the same catalyst produced a gas yield of 85.796%, char yield of 11.438%, and higher tar yield of 2.8% at 900 °C. The higher microwave-assisted performance was attributed to faster heating and better control over reaction conditions, higher reaction rates, and more favorable conditions for hydrogen production.

Autor:innen und Institutionen

  • Department of Chemical and Biomedical Engineering, West Virginia University, Morgantown, West Virginia 26505, United States.
  • Department of Physics and Astronomy, West Virginia University, Morgantown, West Virginia 26505, United States.

ORCID-Profile: Kshitij Tewari, Changle Jiang, Debangsu Bhattacharyya, Jianli Hu

Förderung

  • U.S. Department of Energy

Zitieren

APA

Tewari, K., Burton, D., Robinson, B., Jiang, C., Bhattacharyya, D., & Hu, J. (2026). Sustainable H 2 -Rich Syngas Production via Microwave-Assisted vs Conventional Catalysis of Pinewood. Industrial & Engineering Chemistry Research, 65(2), 1059-1073. https://doi.org/10.1021/acs.iecr.5c02616

Vancouver

Tewari K, Burton D, Robinson B, Jiang C, Bhattacharyya D, Hu J. Sustainable H 2 -Rich Syngas Production via Microwave-Assisted vs Conventional Catalysis of Pinewood. Industrial & Engineering Chemistry Research. 2026;65(2):1059-1073. doi:10.1021/acs.iecr.5c02616

BibTeX
@article{Tewari2026,
  author = {Tewari, Kshitij and Burton, Devin and Robinson, Brandon and Jiang, Changle and Bhattacharyya, Debangsu and Hu, Jianli},
  title = {Sustainable H 2 -Rich Syngas Production via Microwave-Assisted vs Conventional Catalysis of Pinewood},
  journal = {Industrial & Engineering Chemistry Research},
  year = {2026},
  volume = {65},
  number = {2},
  pages = {1059--1073},
  doi = {10.1021/acs.iecr.5c02616}
}
Kostenlos starten →