EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving Geometric Uniformity in Dynamic Chemical Vapor Deposition of Carbon Nanotube Forests

Golnaz Najaf Tomaraei, Moataz Abdulhafez, Soumalya Ghosh, Jaegeun Lee iD, Mostafa Bedewy iD

Industrial & Engineering Chemistry Research · 11.06.2025 · 64 (23) · 11327-11339

DOI: 10.1021/acs.iecr.4c03787 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 27.05.2025. Verfasst von Golnaz Najaf Tomaraei und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering and Materials Science, University of Pittsburgh, 3700 O'Hara Street, Pittsburgh Pennsylvania 15261, United State…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Pittsburgh, Division of Civil, Mechanical and Manufacturing Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Geometric nonuniformities are often observed in the catalytic chemical vapor deposition (CVD) of vertically aligned carbon nanotubes (VACNTs), known as CNT forests. These nonuniformities typically occur in the form of sloped heights and empty regions within the catalyst-covered substrate. To realize the true potential of carbon nanotube forests in unidirectional mass and energy transport applications, it is critical to develop robust manufacturing processes to produce geometrically uniform CNT forests on large-scale substrates in a repeatable manner. Our custom-designed reactor with an IR heating multizone furnace with rapid thermal processing capability allows the programming of dynamic recipes with the catalyst formation temperature decoupled from the CNT nucleation and growth temperature. In this work, we present an approach for tuning the geometric uniformity of CNT forests based on the combined effects of substrate holder design and dynamic recipes during CVD. We propose a mechanism that explains the observed geometric nonuniformities based on both the temperature profile across the catalyst chip, which depends on the substrate holder design, and the temperature range for CNT growth, which depends on the catalyst formation temperature. We performed a comparative study of the properties of alumina layers after annealing with two different substrate holder designs. We found that the actual temperature experienced by the sample depends on the substrate holder, which supports our proposed mechanism. Our work provides insight into the growth of CNT forests with large-scale spatial uniformity and high structural quality.

Autor:innen und Institutionen

  • Department of Mechanical Engineering and Materials Science, University of Pittsburgh, 3700 O'Hara Street, Pittsburgh Pennsylvania 15261, United States.
  • Department of Industrial Engineering, University of Pittsburgh, 3700 O'Hara Street, Pittsburgh Pennsylvania 15261, United States.
  • School of Chemical Engineering, Pusan National University, 2, Busandaehak-ro 63 beon-gil, Geumjeong-gu, Busan 46241, Republic of Korea.
  • Department of Chemical and Petroleum Engineering, University of Pittsburgh, 3700 O'Hara Street, Pittsburgh Pennsylvania 15261, United States.

ORCID-Profile: Jaegeun Lee, Mostafa Bedewy

Förderung

  • University of Pittsburgh
  • Division of Civil, Mechanical and Manufacturing Innovation

Zitieren

APA

Najaf Tomaraei, G., Abdulhafez, M., Ghosh, S., Lee, J., & Bedewy, M. (2025). Improving Geometric Uniformity in Dynamic Chemical Vapor Deposition of Carbon Nanotube Forests. Industrial & Engineering Chemistry Research, 64(23), 11327-11339. https://doi.org/10.1021/acs.iecr.4c03787

Vancouver

Najaf Tomaraei G, Abdulhafez M, Ghosh S, Lee J, Bedewy M. Improving Geometric Uniformity in Dynamic Chemical Vapor Deposition of Carbon Nanotube Forests. Industrial & Engineering Chemistry Research. 2025;64(23):11327-11339. doi:10.1021/acs.iecr.4c03787

BibTeX
@article{NajafTomaraei2025,
  author = {Najaf Tomaraei, Golnaz and Abdulhafez, Moataz and Ghosh, Soumalya and Lee, Jaegeun and Bedewy, Mostafa},
  title = {Improving Geometric Uniformity in Dynamic Chemical Vapor Deposition of Carbon Nanotube Forests},
  journal = {Industrial & Engineering Chemistry Research},
  year = {2025},
  volume = {64},
  number = {23},
  pages = {11327--11339},
  doi = {10.1021/acs.iecr.4c03787}
}
Kostenlos starten →