EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tailoring Waterborne Coating Rheology with Hydrophobically Modified Ethoxylated Urethanes (HEURs): Molecular Architecture Insights Supported by CG-MD Simulations

Ioanna Tzortzi, Imane Joundi, Michail Kavousanakis iD, Theodora Spyriouni, Ariana Bampouli iD, Guillaume Michaud, Tom Van Gerven iD, Georgios D Stefanidis iD

Industrial & Engineering Chemistry Research · 05.06.2024 · 63 (22) · 10009-10026

DOI: 10.1021/acs.iecr.4c00253 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 24.05.2024. Verfasst von Ioanna Tzortzi und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering National Technical University of Athens, Iroon Polytecneiou 9, Zografou Campus, Athens 157 80, Greece. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Horizon 2020 Framework Programme.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel investigation of the effects of the hydrophilic and hydrophobic segments of hydrophobically modified ethoxylated urethanes (HEURs) on the rheological properties of their aqueous solutions, latex-based emulsions, and waterborne paints is demonstrated. Different HEUR thickeners were produced by varying the poly(ethylene glycol) (PEG) molecular weight and terminal hydrophobic size. Results reveal that the strength of hydrophobic associations and, consequently, the rheological properties of HEUR formulations can be effectively controlled by modifying the structure of the hydrophobic segment, specifically, the combination of diisocyanate and monoalcohol. This allows for the on-demand attainment of diverse rheological behaviors ranging from predominantly Newtonian profiles exhibiting lower viscosities to markedly pseudoplastic behaviors with significantly higher viscosities. The length of the hydrophilic group appears to affect viscosity only marginally up to a molecular weight of 23,000 g/mol, with more notable effects at 33,000 g/mol. Additionally, it was indicated that the rheological responses observed in water solutions provide a reliable forecast of their behavior in latex-based emulsions and waterborne paints. Coarse-grained molecular dynamics (CG-MD) simulations were also applied to gain insight into HEUR micelle dynamics in aqueous solutions. Guided by the DBSCAN algorithm, the simulations successfully captured the concentration-dependent behavior and the impact of hydrophilic chain length, aligning with the experimental viscosity trends. Various metrics were employed to provide a comprehensive analysis of the micellization process, including the hydrophobic cluster volume, the total micellar volume, the aggregation number, and the number of chains interconnecting with other micelles.

Autor:innen und Institutionen

  • School of Chemical Engineering National Technical University of Athens, Iroon Polytecneiou 9, Zografou Campus, Athens 157 80, Greece.
  • COATEX SAS, 69730 Genay, France.
  • SCIENOMICS SAS, 16 Rue de l'Arcade, Paris 75008, France.
  • Department of Chemical Engineering, KU Leuven, Celestijnenlaan 200F, Leuven B-3001, Belgium.

ORCID-Profile: Michail Kavousanakis, Ariana Bampouli, Tom Van Gerven, Georgios D Stefanidis

Förderung

  • Horizon 2020 Framework Programme

Zitieren

APA

Tzortzi, I., Joundi, I., Kavousanakis, M., Spyriouni, T., Bampouli, A., Michaud, G., Van Gerven, T., & Stefanidis, G. D. (2024). Tailoring Waterborne Coating Rheology with Hydrophobically Modified Ethoxylated Urethanes (HEURs): Molecular Architecture Insights Supported by CG-MD Simulations. Industrial & Engineering Chemistry Research, 63(22), 10009-10026. https://doi.org/10.1021/acs.iecr.4c00253

Vancouver

Tzortzi I, Joundi I, Kavousanakis M, Spyriouni T, Bampouli A, Michaud G, et al. Tailoring Waterborne Coating Rheology with Hydrophobically Modified Ethoxylated Urethanes (HEURs): Molecular Architecture Insights Supported by CG-MD Simulations. Industrial & Engineering Chemistry Research. 2024;63(22):10009-10026. doi:10.1021/acs.iecr.4c00253

BibTeX
@article{Tzortzi2024,
  author = {Tzortzi, Ioanna and Joundi, Imane and Kavousanakis, Michail and Spyriouni, Theodora and Bampouli, Ariana and Michaud, Guillaume and Van Gerven, Tom and Stefanidis, Georgios D},
  title = {Tailoring Waterborne Coating Rheology with Hydrophobically Modified Ethoxylated Urethanes (HEURs): Molecular Architecture Insights Supported by CG-MD Simulations},
  journal = {Industrial & Engineering Chemistry Research},
  year = {2024},
  volume = {63},
  number = {22},
  pages = {10009--10026},
  doi = {10.1021/acs.iecr.4c00253}
}
Kostenlos starten →