EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Characterization of High-Efficiency Halide Perovskite Nanomaterials for Light-Absorbing Applications

Ahmed Waseem Faridi, Muhammad Imran, Ghulam Hasnain Tariq, Sana Ullah, Syed Farhan Noor, Sabah Ansar, Farooq Sher iD

Industrial & Engineering Chemistry Research · 22.03.2023 · 62 (11) · 4494-4502

DOI: 10.1021/acs.iecr.2c00416 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industrial & Engineering Chemistry Research, online erschienen am 25.04.2022. Verfasst von Ahmed Waseem Faridi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Khwaja Fareed University of Engineering and Information Technology, Rahim Yar Khan 64200, Pakistan. Die Arbeit wurde bisher 53-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Higher Education Commision, Pakistan, King Saud University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inorganic perovskite materials are possible candidates for conversion of solar energy to electrical energy due to their high absorption coefficient. Perovskite solar cells (PSCs) introduced a new type of device structure that has attention due to better efficiencies and interest in PSCs that has been increasing in recent years. Halide perovskite materials such as CsPbIBr2 show remarkable optical and structural performance with their better physical properties. Perovskite solar cells are a possible candidate to replace conventional silicon solar panels. In the present study, CsPbIBr2 perovskite materials' thin films were prepared for light-absorbing application. Five thin films were deposited on the glass substrates by subsequent spin-coating of CsI and PbBr2 solutions, subsequently annealed at different temperature values (as-deposited, 100, 150, 200 and 250 °C) to get CsPbIBr2 thin films with a better crystal structure. Structural characterizations were made by using X-ray diffraction. CsPbIBr2 thin films were found to be polycrystalline in nature. With increasing annealing temperature, the crystallinity was improved, and the crystalline size was increased. Optical properties were studied by using transmission data, and by increasing annealing temperature, a small variation in optical band gap energy was observed in the range of 1.70-1.83 eV. The conductivity of CsPbIBr2 thin films was determined by a hot probe technique and was found to have little fluctuating response toward p-type conductivity, which may be due to intrinsic defects or presence of CsI phase, but a stable intrinsic nature was observed. The obtained physical properties of CsPbIBr2 thin films suggest them as a suitable candidate as a light-harvesting layer. These thin films could be an especially good partner with Si or other lower band gap energy materials in tandem solar cells (TSC). CsPbIBr2 material will harvest light having energy of ∼1.7 eV or higher, while a lower energy part of the solar spectrum will be absorbed in the partner part of the TSC.

Autor:innen und Institutionen

  • Department of Physics, Khwaja Fareed University of Engineering and Information Technology, Rahim Yar Khan 64200, Pakistan.
  • Department of Mechanical Engineering, Khwaja Fareed University of Engineering and Information Technology, Rahim Yar Khan 64200, Pakistan.
  • Center of Excellence in Solid State Physics, University of the Punjab, Lahore 54590, Pakistan.
  • Department of Clinical Laboratory Sciences, College of Applied Medical Sciences, King Saud University, P.O. Box 10219, Riyadh 11433, Saudi Arabia.
  • Department of Engineering, School of Science and Technology, Nottingham Trent University, Nottingham NG11 8NS, United Kingdom.

ORCID-Profile: Farooq Sher

Förderung

  • Engineering and Physical Sciences Research Council
  • Higher Education Commision, Pakistan
  • King Saud University

Zitieren

APA

Faridi, A. W., Imran, M., Tariq, G. H., Ullah, S., Noor, S. F., Ansar, S., & Sher, F. (2023). Synthesis and Characterization of High-Efficiency Halide Perovskite Nanomaterials for Light-Absorbing Applications. Industrial & Engineering Chemistry Research, 62(11), 4494-4502. https://doi.org/10.1021/acs.iecr.2c00416

Vancouver

Faridi AW, Imran M, Tariq GH, Ullah S, Noor SF, Ansar S, et al. Synthesis and Characterization of High-Efficiency Halide Perovskite Nanomaterials for Light-Absorbing Applications. Industrial & Engineering Chemistry Research. 2023;62(11):4494-4502. doi:10.1021/acs.iecr.2c00416

BibTeX
@article{Faridi2023,
  author = {Faridi, Ahmed Waseem and Imran, Muhammad and Tariq, Ghulam Hasnain and Ullah, Sana and Noor, Syed Farhan and Ansar, Sabah and Sher, Farooq},
  title = {Synthesis and Characterization of High-Efficiency Halide Perovskite Nanomaterials for Light-Absorbing Applications},
  journal = {Industrial & Engineering Chemistry Research},
  year = {2023},
  volume = {62},
  number = {11},
  pages = {4494--4502},
  doi = {10.1021/acs.iecr.2c00416}
}
Kostenlos starten →