Synergistic PAM/XG Network Enables Suspension-Stable and Long-Range Collimated Abrasive Slurry Jet for Hard-Rock Drilling
Energy & Fuels · 23.11.2026
DOI: 10.1021/acs.energyfuels.6c05166 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy & Fuels, online erschienen am 23.11.2026. Verfasst von Zhe Zhou und 5 weiteren Autor:innen. Die Arbeit nennt 56 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Science and Technology Major Project.
Abstract (Originalsprache)
Abrasive water jet (AWJ) technology is critical for unconventional natural gas extraction and hard-rock drilling. However, conventional water-based carriers suffer from rapid particle settling and severe kinetic energy attenuation, whereas single-polymer carrier fluids fail to simultaneously satisfy particle suspension, pumpability, and long-standoff jet collimation. To overcome the trade-off between suspension stability and fluid mobility, this study proposes a rigid-flexible binary polymer carrier blending polyacrylamide (PAM) and xanthan gum (XG) at an optimal mass ratio of 1:9 (1.6 wt % total concentration). Rheological and jetting characterizations demonstrate that the synergistic PAM/XG network sustains ceramsite particles for 2723 s while reducing efflux time by 14.75% compared to pure XG. Under high-pressure jetting, the fluid exhibits pronounced shear-thinning (viscosity dropping to 21 mPa·s) and achieves an 87.4% thixotropic structural recovery, generating viscoelastic hoop stresses that reduce jet expansion width by 58.3% at a 25 cm standoff distance. Consequently, at an extended standoff distance of 120 mm, the composite carrier achieves an erosion depth of 39.5 mm and a removal volume of 8.3 cm3, which represent increases of 42.1 and 260.9% over AWJ, respectively, while decreasing kinetic energy attenuation constants kH and kV by 48.3 and 49.4%. Mechanistically, instantaneous shear-thinning and rapid structural rebuild eliminate bottom-hole bed cushioning and enhance sidewall reaming, establishing a broad-profile, deep-slotted rock-breaking mode. This work provides a low-energy, long-standoff abrasive slurry jet carrier strategy for deep hard-rock radial jet drilling.
Förderung
- National Natural Science Foundation of China
- National Science and Technology Major Project
Zitieren
APA
Zhou, Z., Ma, C., Ge, Z., Cao, H., Liu, X., & Shi, L. (2026). Synergistic PAM/XG Network Enables Suspension-Stable and Long-Range Collimated Abrasive Slurry Jet for Hard-Rock Drilling. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.6c05166
Vancouver
Zhou Z, Ma C, Ge Z, Cao H, Liu X, Shi L. Synergistic PAM/XG Network Enables Suspension-Stable and Long-Range Collimated Abrasive Slurry Jet for Hard-Rock Drilling. Energy & Fuels. 2026. doi:10.1021/acs.energyfuels.6c05166
BibTeX
@article{Zhou2026,
author = {Zhou, Zhe and Ma, Can and Ge, Zhaolong and Cao, Hongfei and Liu, Xiangjie and Shi, Linhan},
title = {Synergistic PAM/XG Network Enables Suspension-Stable and Long-Range Collimated Abrasive Slurry Jet for Hard-Rock Drilling},
journal = {Energy & Fuels},
year = {2026},
doi = {10.1021/acs.energyfuels.6c05166}
}
EUVIMED