EUVIMEDEUVIMED entdecken
Crossref

Pore–Scale Coupling of Invasion Dynamics and Gas Trapping during Water–Lock Mitigation in Gas–Saturated Porous Media

Xinyu Tian, Dongliang Li, Jingsheng Lu, Deqing Liang, Yajun Deng, Xiaotong Xu, Jie Bai, Leyan Wen, Changqi Li, Xingyue Wang, Kaixiang Shen

Energy & Fuels · 20.08.2026 · 40 (33) · 18222-18234

DOI: 10.1021/acs.energyfuels.6c03022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energy & Fuels, online erschienen am 11.08.2026. Verfasst von Xinyu Tian und 10 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Science and Technology Projects in Key Areas of Nansha District.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Water-lock effects can impair gas transport in low-permeability hydrate-bearing clayey-silt sediments. However, current screening strategies for candidate mitigation formulations rely primarily on macroscopic measurements and provide limited insight into pore-scale liquid invasion and gas trapping. Previous microfluidic studies have focused mainly on fundamental two-phase displacement behavior, whereas systematic pore-scale frameworks for comparing multiple candidate water-lock mitigation formulations remain limited.In this study, microfluidic visualization and quantitative image analysis were used to compare the invasion behavior of 12 solution systems, including deionized water, simulated seawater, and alcohol-, polymer-, and surfactant-based formulations, in an initially gas-saturated pore network. The A–B transport time (tAB) ranged from 26 to 161 s, whereas the final residual gas saturation (Sgr) ranged from 0.118 to 0.682. A short tAB did not necessarily correspond to low Sgr because several rapidly advancing formulations propagated predominantly along preferential pathways and bypassed substantial portions of the pore space. In contrast, more stable displacement fronts were associated with broader pore-scale sweep and lower residual gas trapping, suggesting that displacement-front stability is closely associated with the final gas distribution and liquid occupancy. Among the tested systems, the C4 formulation, containing 10 wt % polyethylene glycol (PEG), 3.5 wt % NaCl, and 86.5 wt % deionized water, provided the most favorable balance between final liquid-phase occupancy and stabilization time. The 20 wt % ethanol formulation (C3) achieved the lowest Sgr but required a longer stabilization time. These results indicate that formulation screening should jointly consider A–B transport time, displacement-front stability, and final liquid-phase occupancy rather than use propagation rate as the sole criterion. The proposed framework provides a pore-scale basis for the preliminary screening of candidate water-lock mitigation formulations, although further validation in hydrate-bearing clayey-silt sediments is required.

Förderung

  • National Key Research and Development Program of China
  • Science and Technology Projects in Key Areas of Nansha District

Zitieren

APA

Tian, X., Li, D., Lu, J., Liang, D., Deng, Y., Xu, X., Bai, J., Wen, L., Li, C., Wang, X., & Shen, K. (2026). Pore–Scale Coupling of Invasion Dynamics and Gas Trapping during Water–Lock Mitigation in Gas–Saturated Porous Media. Energy & Fuels, 40(33), 18222-18234. https://doi.org/10.1021/acs.energyfuels.6c03022

Vancouver

Tian X, Li D, Lu J, Liang D, Deng Y, Xu X, et al. Pore–Scale Coupling of Invasion Dynamics and Gas Trapping during Water–Lock Mitigation in Gas–Saturated Porous Media. Energy & Fuels. 2026;40(33):18222-18234. doi:10.1021/acs.energyfuels.6c03022

BibTeX
@article{Tian2026,
  author = {Tian, Xinyu and Li, Dongliang and Lu, Jingsheng and Liang, Deqing and Deng, Yajun and Xu, Xiaotong and Bai, Jie and Wen, Leyan and Li, Changqi and Wang, Xingyue and Shen, Kaixiang},
  title = {Pore–Scale Coupling of Invasion Dynamics and Gas Trapping during Water–Lock Mitigation in Gas–Saturated Porous Media},
  journal = {Energy & Fuels},
  year = {2026},
  volume = {40},
  number = {33},
  pages = {18222--18234},
  doi = {10.1021/acs.energyfuels.6c03022}
}
Kostenlos starten →