Autothermal Sorption-Enhanced Steam Reforming of Renewable Syngas: Composition-Dependent Hydrogen Yield and Energy Efficiency
Energy & Fuels · 30.07.2026 · 40 (30) · 16757-16769
DOI: 10.1021/acs.energyfuels.6c01902 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy & Fuels, online erschienen am 17.07.2026. Verfasst von Alejandra Vega und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Carbon Science and Technology (INCAR), CSIC, Francisco Pintado Fe 26, Oviedo 33011, Spain. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia, Innovaci?n y Universidades, European Regional Development Fund, Gobierno del Principado de Asturias.
Abstract (Originalsprache)
Producing renewable hydrogen from biomass is essential for the transition to low-carbon energy systems and sustainable fuel production. Biomass-derived syngas streams from biorefineries are a promising hydrogen source, but their compositional variability and high fractions of CO2 and H2 significantly affect hydrogen production performance. Sorption-enhanced steam reforming (SESR) combines steam reforming with in situ CO2 capture using CaO-based sorbents, enhancing hydrogen production through process intensification. This work investigates autothermal SESR enabled by CO2-rich feed compositions and heat integration to improve energy efficiency. An Aspen Plus equilibrium model was used to evaluate the effects of syngas composition and operating conditions (steam-to-carbon = 2.5–6.5, CaO/C = 1.5–2.5) on hydrogen production and energy performance at 600 °C and 10 bar. CO-rich feeds improve H2 purity, CH4 conversion, CO2 capture efficiency, and cold gas efficiency (CGE) by promoting the water–gas shift reaction and methane reforming through reduced CO2 partial pressure. In contrast, CH4- and H2-rich feeds decrease H2 purity and methane conversion due to lower effective steam-to-methane ratios and equilibrium limitations. However, these compositions improve overall energy efficiency by reducing the external fuel required for sorbent regeneration. Increasing steam availability enhances performance up to a threshold beyond which Ca(OH)2 formation becomes significant, which strongly penalizes efficiency due to additional regeneration energy demand. Under optimal conditions, hydrogen purities up to 99.2 vol %, CO2 capture efficiency of 98.8%, and a CGE of 81% are achieved. These results help define operating windows for autothermal SESR and support the design of flexible and energy-efficient hydrogen production systems.
Autor:innen und Institutionen
- Institute of Carbon Science and Technology (INCAR), CSIC, Francisco Pintado Fe 26, Oviedo 33011, Spain.
ORCID-Profile: Fernando Rubiera, Covadonga Pevida, María Victoria Gil
Förderung
- Ministerio de Ciencia, Innovaci?n y Universidades
- European Regional Development Fund
- Gobierno del Principado de Asturias
- European Social Fund
Zitieren
APA
Vega, A., Rubiera, F., Pevida, C., & Gil, M. V. (2026). Autothermal Sorption-Enhanced Steam Reforming of Renewable Syngas: Composition-Dependent Hydrogen Yield and Energy Efficiency. Energy & Fuels, 40(30), 16757-16769. https://doi.org/10.1021/acs.energyfuels.6c01902
Vancouver
Vega A, Rubiera F, Pevida C, Gil MV. Autothermal Sorption-Enhanced Steam Reforming of Renewable Syngas: Composition-Dependent Hydrogen Yield and Energy Efficiency. Energy & Fuels. 2026;40(30):16757-16769. doi:10.1021/acs.energyfuels.6c01902
BibTeX
@article{Vega2026,
author = {Vega, Alejandra and Rubiera, Fernando and Pevida, Covadonga and Gil, María Victoria},
title = {Autothermal Sorption-Enhanced Steam Reforming of Renewable Syngas: Composition-Dependent Hydrogen Yield and Energy Efficiency},
journal = {Energy & Fuels},
year = {2026},
volume = {40},
number = {30},
pages = {16757--16769},
doi = {10.1021/acs.energyfuels.6c01902}
}
EUVIMED