Life-Cycle Assessment of an Industrial Recycling Process for Photovoltaic Panels Integrating Mechanical and Air-Assisted Pyrolysis Treatments
Energy & Fuels · 30.04.2026 · 40 (17) · 9488-9498
DOI: 10.1021/acs.energyfuels.6c00342 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy & Fuels, online erschienen am 16.04.2026. Verfasst von Javier Ramirez-Cantero und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Faculty of Sciences, University of Granada, Avda. Fuente Nueva, s/n, 18071 Granada, Spain. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia, Innovación y Universidades, Corporación Tecnológica de Andalucía, European Social Fund Plus.
Abstract (Originalsprache)
The rapid growth of photovoltaic (PV) installations has increased the need for the sustainable management of end-of-life PV modules. This study proposes an integrated mechanical and thermal recycling system for crystalline-silicon PV waste, combining mechanical pretreatment for dismantling and material separation with air-assisted pyrolysis in a tilting furnace to remove encapsulant and backsheet polymers. This system recovers electronic components, glass, silicon, aluminum, copper, and a liquid oil suitable for energy recovery. An industrial-scale system capable of treating 60 PV modules per hour was assessed through life-cycle assessment to quantify environmental impacts, identify hotspots, and compare two scenarios: mechanical recycling alone versus combined mechanical and thermal recycling. Results show that the integrated recycling system has the greatest impact on photochemical ozone formation, climate change, and the use of fossil resources. The results for these impact categories make the thermal section responsible for over 61.7% of the total environmental impact, primarily due to the emission of ethyne, ethylene, carbon dioxide, and methane. Nevertheless, the production of valuable byproducts is a clear environmental advantage that largely compensates for the impact created by the integrated recycling system. A comparative LCA also concluded that integrated recycling reduces 21.3% of the single score of the mechanical recycling alone, confirming the environmental superiority of our proposed system. Overall, this study supports circular-economy strategies in the PV sector by demonstrating the environmental advantages of combining mechanical and thermal processes for industrial PV recycling.
Autor:innen und Institutionen
- Department of Chemical Engineering, Faculty of Sciences, University of Granada, Avda. Fuente Nueva, s/n, 18071 Granada, Spain.
- Greening Relive, C/Atalaya 4, 18015 Granada, Spain.
ORCID-Profile: Guillermo Garcia-Garcia, María Ángeles Martín-Lara, Mónica Calero
Förderung
- Ministerio de Ciencia, Innovación y Universidades
- Corporación Tecnológica de Andalucía
- European Social Fund Plus
- Greening Global, CDTI
Zitieren
APA
Ramirez-Cantero, J., Garcia-Garcia, G., Martín-Lara, M. Á., Hernández, Z., Pérez, A., & Calero, M. (2026). Life-Cycle Assessment of an Industrial Recycling Process for Photovoltaic Panels Integrating Mechanical and Air-Assisted Pyrolysis Treatments. Energy & Fuels, 40(17), 9488-9498. https://doi.org/10.1021/acs.energyfuels.6c00342
Vancouver
Ramirez-Cantero J, Garcia-Garcia G, Martín-Lara MÁ, Hernández Z, Pérez A, Calero M. Life-Cycle Assessment of an Industrial Recycling Process for Photovoltaic Panels Integrating Mechanical and Air-Assisted Pyrolysis Treatments. Energy & Fuels. 2026;40(17):9488-9498. doi:10.1021/acs.energyfuels.6c00342
BibTeX
@article{RamirezCantero2026,
author = {Ramirez-Cantero, Javier and Garcia-Garcia, Guillermo and Martín-Lara, María Ángeles and Hernández, Zaida and Pérez, Antonio and Calero, Mónica},
title = {Life-Cycle Assessment of an Industrial Recycling Process for Photovoltaic Panels Integrating Mechanical and Air-Assisted Pyrolysis Treatments},
journal = {Energy & Fuels},
year = {2026},
volume = {40},
number = {17},
pages = {9488--9498},
doi = {10.1021/acs.energyfuels.6c00342}
}
EUVIMED