EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Benzenoid Aromatics from Renewable Resources

Shasha Zheng iD, Zhenlei Zhang, Songbo He iD, Huaizhou Yang iD, Hanan Atia, Ali M Abdel-Mageed iD, Sebastian Wohlrab iD, Eszter Baráth iD, Sergey Tin, Hero J Heeres iD, Peter J Deuss iD, Johannes G de Vries iD

Chemical Reviews · 09.10.2024 · 124 (19) · 10701-10876

DOI: 10.1021/acs.chemrev.4c00087 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Chemical Reviews, online erschienen am 17.09.2024. Verfasst von Shasha Zheng und 11 weiteren Autor:innen. Beteiligte Einrichtung: Leibniz Institut für Katalyse e.V., Albert-Einstein-Strasse 29a, 18059 Rostock, Germany. Die Arbeit wurde bisher 75-mal zitiert (Crossref) und nennt 1276 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this Review, all known chemical methods for the conversion of renewable resources into benzenoid aromatics are summarized. The raw materials that were taken into consideration are CO2; lignocellulose and its constituents cellulose, hemicellulose, and lignin; carbohydrates, mostly glucose, fructose, and xylose; chitin; fats and oils; terpenes; and materials that are easily obtained via fermentation, such as biogas, bioethanol, acetone, and many more. There are roughly two directions. One much used method is catalytic fast pyrolysis carried out at high temperatures (between 300 and 700 °C depending on the raw material), which leads to the formation of biochar; gases, such as CO, CO2, H2, and CH4; and an oil which is a mixture of hydrocarbons, mostly aromatics. The carbon selectivities of this method can be reasonably high when defined small molecules such as methanol or hexane are used but are rather low when highly oxygenated compounds such as lignocellulose are used. The other direction is largely based on the multistep conversion of platform chemicals obtained from lignocellulose, cellulose, or sugars and a limited number of fats and terpenes. Much research has focused on furan compounds such as furfural, 5-hydroxymethylfurfural, and 5-chloromethylfurfural. The conversion of lignocellulose to xylene via 5-chloromethylfurfural and dimethylfuran has led to the construction of two large-scale plants, one of which has been operational since 2023.

Autor:innen und Institutionen

  • Leibniz Institut für Katalyse e.V., Albert-Einstein-Strasse 29a, 18059 Rostock, Germany.
  • State Key Laboratory of Heavy Oil Processing, College of Chemical Engineering and Environment, China University of Petroleum (Beijing), 102249 Beijing, China.
  • Joint International Research Laboratory of Circular Carbon, Nanjing Tech University, Nanjing 211816, PR China.
  • Green Chemical Reaction Engineering, Engineering and Technology Institute Groningen, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands.

ORCID-Profile: Shasha Zheng, Songbo He, Huaizhou Yang, Ali M Abdel-Mageed, Sebastian Wohlrab, Eszter Baráth, Hero J Heeres, Peter J Deuss, Johannes G de Vries

Zitieren

APA

Zheng, S., Zhang, Z., He, S., Yang, H., Atia, H., Abdel-Mageed, A. M., Wohlrab, S., Baráth, E., Tin, S., Heeres, H. J., Deuss, P. J., & de Vries, J. G. (2024). Benzenoid Aromatics from Renewable Resources. Chemical Reviews, 124(19), 10701-10876. https://doi.org/10.1021/acs.chemrev.4c00087

Vancouver

Zheng S, Zhang Z, He S, Yang H, Atia H, Abdel-Mageed AM, et al. Benzenoid Aromatics from Renewable Resources. Chemical Reviews. 2024;124(19):10701-10876. doi:10.1021/acs.chemrev.4c00087

BibTeX
@article{Zheng2024,
  author = {Zheng, Shasha and Zhang, Zhenlei and He, Songbo and Yang, Huaizhou and Atia, Hanan and Abdel-Mageed, Ali M and Wohlrab, Sebastian and Baráth, Eszter and Tin, Sergey and Heeres, Hero J and Deuss, Peter J and de Vries, Johannes G},
  title = {Benzenoid Aromatics from Renewable Resources},
  journal = {Chemical Reviews},
  year = {2024},
  volume = {124},
  number = {19},
  pages = {10701--10876},
  doi = {10.1021/acs.chemrev.4c00087}
}
Kostenlos starten →