EUVIMEDEUVIMED entdecken
Crossref

Occupational Exposure to Manganese from Welding Fumes during Arc Welding Operations: Data from the Field

Juliana H. Halbach, Chandler M. Cottam, Ravyn Tyler

ACS Chemical Health & Safety · 28.07.2025 · 32 (4) · 366-377

DOI: 10.1021/acs.chas.5c00048 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Chemical Health & Safety, online erschienen am 10.06.2025. Verfasst von Juliana H. Halbach und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 49 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Workers who perform arc welding are exposed to fumes generated by the joining of metals. One generated fume is manganese, a metal with heightened toxicological properties. This paper explores welders’ manganese exposures during the four most performed arc welding types: Shielded Metal Arc Welding (SMAW), Gas Tungsten Arc Welding (GTAW), Gas Metal Arc Welding (GMAW), and Flux Cored Arc Welding (FCAW). Exposure data were collected in varying field environmental conditions at Lawrence Livermore National Laboratory (LLNL) in Livermore, California. Conditions ranged from indoor shop areas controlled with local exhaust ventilation (LEV) to outdoor construction areas with variable wind directions and speeds. Exposure samples were taken for both inhalable and respirable fractions of manganese. This sampling effort was conducted in response to the updated 2016 Manganese Threshold Limit Values (TLVs) that were adopted into LLNL’s contract in 2019 to ensure compliance with the new, lower exposure standard. The resulting data collected from the field informed risk level determinations that were calculated using Bayesian Decision Analysis (BDA) to determine potential exceedances to the manganese TLVs. The resulting BDA outcomes indicate potential for manganese overexposure during SMAW, GMAW, and FCAW arc welding processes. LLNL leverages these BDA outcomes to make health and safety risk-based assessment decisions for a wide range of construction, research and development, engineering, and maintenance activities conducted by many of its 9,000+ employee workforce.

Zitieren

APA

Halbach, J. H., Cottam, C. M., & Tyler, R. (2025). Occupational Exposure to Manganese from Welding Fumes during Arc Welding Operations: Data from the Field. ACS Chemical Health & Safety, 32(4), 366-377. https://doi.org/10.1021/acs.chas.5c00048

Vancouver

Halbach JH, Cottam CM, Tyler R. Occupational Exposure to Manganese from Welding Fumes during Arc Welding Operations: Data from the Field. ACS Chemical Health & Safety. 2025;32(4):366-377. doi:10.1021/acs.chas.5c00048

BibTeX
@article{Halbach2025,
  author = {Halbach, Juliana H. and Cottam, Chandler M. and Tyler, Ravyn},
  title = {Occupational Exposure to Manganese from Welding Fumes during Arc Welding Operations: Data from the Field},
  journal = {ACS Chemical Health & Safety},
  year = {2025},
  volume = {32},
  number = {4},
  pages = {366--377},
  doi = {10.1021/acs.chas.5c00048}
}
Kostenlos starten →