Leveraging Radiofrequency Identification Success Beyond Hazardous Material Inventory Management at a National Laboratory
ACS Chemical Health & Safety · 27.01.2025 · 32 (1) · 30-38
DOI: 10.1021/acs.chas.4c00104 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Chemical Health & Safety, online erschienen am 11.01.2025. Verfasst von Armando R. Diaz De Jesus und 8 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 14 Literaturangaben. Gefördert von: Oak Ridge Institute for Science and Education, Lawrence Livermore National Laboratory, National Nuclear Security Administration.
Abstract (Originalsprache)
Effective inventory management can be overshadowed by conflicting priorities in organizational procedures, particularly in research-focused institutions such as national laboratories that handle expensive, delicate, and hazardous materials. This study investigated the potential of radiofrequency identification (RFID) technology, currently used for hazardous chemical inventory, in applications with higher metal interference and absorption, specifically pressure release device (PRD) compliance and nuclear container management, at Lawrence Livermore National Laboratory (LLNL). This study was done to document best practices to enhance inventory identification speeds for inventory reconciliation and inventory recall and to explore optimal configurations for RFID implementation compared to traditional manual methods of equipment management. Tests were conducted to determine the ideal RFID tag orientation (read at angles of 0°, 90°, and 270°), various container layouts (linear, separated, curved, operational), and ID methods such as manual, barcode, and RFID performing three trials per method per orientation. Results indicated that 0° was the optimal read angle for minimizing metallic interference, and the operational and curved arrangements significantly outperformed the linear and separated configurations in read speed. 3D printed mounts were developed and tested, increasing the read range of the RFID reader by up to 235% in cases of high metallic interference. The RFID technology demonstrated an average speed increase of 65% over a simplified manual identification, which supports the conclusion that RFID is a more efficient method for large hazardous inventory management and equipment reconciliation. Additionally, capturing meta-data, such as location and date, can be used to query for inventory recall and automated updating of record information.
Förderung
- Oak Ridge Institute for Science and Education
- Lawrence Livermore National Laboratory
- National Nuclear Security Administration
Zitieren
APA
Jesus, A. R. D. D., Pagan, N. H., Marrero, G. A. C., Rueda, D. M., Werres, B., Ortiz-Rivera, E. I., Aviles, L. T., Roa, D. A. A., & Lara, R. B. (2025). Leveraging Radiofrequency Identification Success Beyond Hazardous Material Inventory Management at a National Laboratory. ACS Chemical Health & Safety, 32(1), 30-38. https://doi.org/10.1021/acs.chas.4c00104
Vancouver
Jesus ARDD, Pagan NH, Marrero GAC, Rueda DM, Werres B, Ortiz-Rivera EI, et al. Leveraging Radiofrequency Identification Success Beyond Hazardous Material Inventory Management at a National Laboratory. ACS Chemical Health & Safety. 2025;32(1):30-38. doi:10.1021/acs.chas.4c00104
BibTeX
@article{Jesus2025,
author = {Jesus, Armando R. Diaz De and Pagan, Nahomy Hernandez and Marrero, Giovanni Andre Cartagena and Rueda, Diego Merchan and Werres, Bernd and Ortiz-Rivera, Eduardo I. and Aviles, Luis Traverso and Roa, Diego Andres Aponte and Lara, Raul Baez},
title = {Leveraging Radiofrequency Identification Success Beyond Hazardous Material Inventory Management at a National Laboratory},
journal = {ACS Chemical Health & Safety},
year = {2025},
volume = {32},
number = {1},
pages = {30--38},
doi = {10.1021/acs.chas.4c00104}
}
EUVIMED