ZnO2/CNT Nanocomposite-Based Electrochemical Sensors for the Detection of Trinitrotoluene
ACS Chemical Health & Safety · 22.01.2024 · 31 (1) · 85-97
DOI: 10.1021/acs.chas.3c00096 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Chemical Health & Safety, online erschienen am 29.12.2023. Verfasst von Bharti Sharma und 3 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: Life Sciences Research Board.
Abstract (Originalsprache)
Global pollution of soil and water supplies due to the leftover dumping of nitroexplosives is a critical issue. Increasing mining and construction activity leads to a significant growth in the trinitrotoluene (TNT) market, making it a lethal contaminant that should be detected early to prevent consumption. Here, in this work, a highly sensitive voltammetric trinitrotoluene (TNT) sensor has been fabricated by modifying a gold electrode (AuE) with a ZnO2/carbon nanotube (CNT) nanocomposite (ZnO2/CNT@AuE). The ZnO2/CNT nanocomposite was synthesized by the coprecipitation method. Morphological and chemical analyses of the synthesized nanostructure was done through different high-end characterization techniques [Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM)]. The electrocatalytic reduction behavior of the electrochemical probe, ZnO2/CNT@AuE, toward TNT was studied in phosphate buffer solution (PBS, pH 7.0) using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. The ZnO2/CNT nanocomposite deposited on the electrode surface improves the conductivity and active sites for electrocatalytic reduction, significantly enhancing the designed sensor’s performance. The fabricated sensor exhibited an outstanding sensing performance and a rapid response when exposed to TNT with a higher sensitivity (80.53 μA cm–2 μM–1) and a lower detection limit (3.4 nM). In addition to the excellent efficacy, the newly developed sensor showed high reproducibility and long-term stability on repeated use. The sensor detects TNT over a wide linear range (4–500 nm) and has good anti-interference capabilities. The ZnO2/CNT@AuE probe has been applied successfully to detect TNT in real water samples. Moreover, electrochemical applications can be expanded by implementing the present electrochemical strategy.
Förderung
- Life Sciences Research Board
Zitieren
APA
Sharma, B., Jain, S., Kumar, S., & Dilbaghi, N. (2024). ZnO2/CNT Nanocomposite-Based Electrochemical Sensors for the Detection of Trinitrotoluene. ACS Chemical Health & Safety, 31(1), 85-97. https://doi.org/10.1021/acs.chas.3c00096
Vancouver
Sharma B, Jain S, Kumar S, Dilbaghi N. ZnO2/CNT Nanocomposite-Based Electrochemical Sensors for the Detection of Trinitrotoluene. ACS Chemical Health & Safety. 2024;31(1):85-97. doi:10.1021/acs.chas.3c00096
BibTeX
@article{Sharma2024,
author = {Sharma, Bharti and Jain, Shikha and Kumar, Sandeep and Dilbaghi, Neeraj},
title = {ZnO2/CNT Nanocomposite-Based Electrochemical Sensors for the Detection of Trinitrotoluene},
journal = {ACS Chemical Health & Safety},
year = {2024},
volume = {31},
number = {1},
pages = {85--97},
doi = {10.1021/acs.chas.3c00096}
}
EUVIMED