EUVIMEDEUVIMED entdecken
Crossref

Preparation of Facet-Free 8-Inch n-Type 4H-SiC Substrates

Xixi Xiong, Zhenxing Fu, Hongxi Wang, Xiaocheng Jiang, Wenhao Han, Linlin Che, Xianglong Yang, Xiufang Chen, Xuejian Xie, Guanglei Zhong, Guojian Yu, Guojie Hu und 2 weitere

Crystal Growth & Design · 07.10.2026 · 26 (19) · 7515-7524

DOI: 10.1021/acs.cgd.6c00379 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystal Growth & Design, online erschienen am 22.09.2026. Verfasst von Xixi Xiong und 13 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Gefördert von: Key Technology Research and Development Program of Shandong Province, National Natural Science Foundation of China, Taishan Scholar Project of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During the growth of n-type 4H-SiC crystals by the PVT method, the resistivity in the facet region is lower than that in the non-facet region, which reduces cutting efficiency during laser slicing as the facet area requires repeated cutting. In addition, the facet region is prone to the multiplication of TEDs and stacking faults, resulting in a higher defect density that degrades the substrate quality. Therefore, the preparation of facet-free substrates is particularly important for improving the efficiency of laser cutting and the quality of the substrate. In this study, the growth was carried out on the 4° off-axis 4H-SiC seed with a diameter of 220 mm. A specific thermal field was constructed through theoretical analysis and thermal field simulation for crystal growth. In this thermal field, the facet was located at the edge of the crystal and had a small width. Subsequently, the facet was removed by off-center cropping during the rounding stage. Finally, facet-free 8-inch n-type 4H-SiC substrates were obtained through slicing, grinding, and polishing. Substrate scan images, resistivity distribution maps, and Raman mapping images of the LOPC mode confirmed that the obtained substrates were facet-free. The facet-free substrate exhibits a low TED density and is free of stacking faults, and its resistivity heterogeneity is only 0.9%, significantly lower than that of substrates with facets. Moreover, the in-plane free carrier concentration difference of the facet-free substrate was minimal, indicating high electrical property uniformity.

Förderung

  • Key Technology Research and Development Program of Shandong Province
  • National Natural Science Foundation of China
  • Taishan Scholar Project of Shandong Province

Zitieren

APA

Xiong, X., Fu, Z., Wang, H., Jiang, X., Han, W., Che, L., Yang, X., Chen, X., Xie, X., Zhong, G., Yu, G., Hu, G., Li, X., & Xu, X. (2026). Preparation of Facet-Free 8-Inch n-Type 4H-SiC Substrates. Crystal Growth & Design, 26(19), 7515-7524. https://doi.org/10.1021/acs.cgd.6c00379

Vancouver

Xiong X, Fu Z, Wang H, Jiang X, Han W, Che L, et al. Preparation of Facet-Free 8-Inch n-Type 4H-SiC Substrates. Crystal Growth & Design. 2026;26(19):7515-7524. doi:10.1021/acs.cgd.6c00379

BibTeX
@article{Xiong2026,
  author = {Xiong, Xixi and Fu, Zhenxing and Wang, Hongxi and Jiang, Xiaocheng and Han, Wenhao and Che, Linlin and Yang, Xianglong and Chen, Xiufang and Xie, Xuejian and Zhong, Guanglei and Yu, Guojian and Hu, Guojie and Li, Xiaomeng and Xu, Xiangang},
  title = {Preparation of Facet-Free 8-Inch n-Type 4H-SiC Substrates},
  journal = {Crystal Growth & Design},
  year = {2026},
  volume = {26},
  number = {19},
  pages = {7515--7524},
  doi = {10.1021/acs.cgd.6c00379}
}
Kostenlos starten →