Crystallization Kinetics in Industrial Fats: The Effect of Substituting Stearic Acid for Palmitic Acid in Fats Containing Lauric Acid
Crystal Growth & Design · 19.08.2026 · 26 (16) · 6319-6336
DOI: 10.1021/acs.cgd.6c00218 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystal Growth & Design, online erschienen am 10.08.2026. Verfasst von Julia Seilert und 4 weiteren Autor:innen. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study explores the crystallization kinetics in multicomponent and lauric acid-containing fat blends. The role of the dominating saturated fatty acid (palmitic versus stearic acid) was explored. The blends contained predominantly three main triglyceride groups: trisaturated triglycerides (H3), trisaturated/medium-chain triglycerides (H2M), and monounsaturated triglycerides (H2U). Each group contains more than one triglyceride. This grouping was used as a compositional framework to compare trends across model and commercial systems. The impact of H3 content (8% vs 4%) and dominant saturated fatty acid (palmitic versus stearic acid) on crystallization was investigated using differential scanning calorimetry (DSC) and small- and wide-angle X-ray scattering (SAXS/WAXS). To further our understanding of the crystallization kinetics in ternary mixtures, symmetrical academic replicates (true ternary blends) PPP-PLaP-POP and SSS-SLaS-SOS in rapeseed oil were studied. All samples were analyzed during cooling and short isothermal holding to capture initial differences in mixed crystal formation/cocrystallization. Results revealed a multistep crystallization process, with commercial blends displaying a long-persisting α-phase coexisting with β′ and β phases. The multiple β′ phases differed in composition and dissolution temperature. In contrast, academic blends showed a short-lived α-phase followed by late recrystallization into the β phase. Blends containing a higher amount of H3 triglycerides (8%) exhibited a strong recrystallization into a β phase, indicating that the H3 content exceeded the limit for H3 inclusion into a mixed crystalline phase with H2M and other groups. The transition into β was slowed down in the S-based systems. Overall, the H3 level played a greater role in the P-based systems with no β phase in C4-P─the P-based commercial system containing 4% of H3. This renders the factors dominant saturated fatty acid and H3 level interrelated. The academic blends demonstrated relatively simple crystallization and melting behavior with a drastic difference to the commercial systems observed in SAXS/WAXS. These findings emphasize the difficulty in simplifying the triglyceride composition in fat crystallization. Still, breaking down industrial fat crystallization into the main triglycerides proved to be a useful approach to further our understanding.
Zitieren
APA
Seilert, J., Roenneke, H., Pauw, B. R., Dol, G., & Flöter, E. (2026). Crystallization Kinetics in Industrial Fats: The Effect of Substituting Stearic Acid for Palmitic Acid in Fats Containing Lauric Acid. Crystal Growth & Design, 26(16), 6319-6336. https://doi.org/10.1021/acs.cgd.6c00218
Vancouver
Seilert J, Roenneke H, Pauw BR, Dol G, Flöter E. Crystallization Kinetics in Industrial Fats: The Effect of Substituting Stearic Acid for Palmitic Acid in Fats Containing Lauric Acid. Crystal Growth & Design. 2026;26(16):6319-6336. doi:10.1021/acs.cgd.6c00218
BibTeX
@article{Seilert2026,
author = {Seilert, Julia and Roenneke, Hanna and Pauw, Brian R. and Dol, Georg and Flöter, Eckhard},
title = {Crystallization Kinetics in Industrial Fats: The Effect of Substituting Stearic Acid for Palmitic Acid in Fats Containing Lauric Acid},
journal = {Crystal Growth & Design},
year = {2026},
volume = {26},
number = {16},
pages = {6319--6336},
doi = {10.1021/acs.cgd.6c00218}
}
EUVIMED