Methacrylated Cellulose Nanocrystals as Fillers for the Development of Photo-Cross-Linkable Cytocompatible Biosourced Formulations Targeting 3D Printing
Biomacromolecules · 2023
DOI: 10.1021/acs.biomac.3c01090 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomacromolecules, 2023. Verfasst von Lénaïc Soullard und 7 weiteren Autor:innen. Beteiligte Einrichtung: Univ. Grenoble Alpes, CEA, LITEN, DTNM, Grenoble 38054, France. Hauptthemen laut MEDLINE: Cellulose, Nanoparticles. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 78 Literaturangaben. Gefördert von: Agence Nationale de la Recherche, Universit? Grenoble Alpes, Commissariat ? l'?nergie Atomique et aux ?nergies Alternatives.
Abstract (Originalsprache)
Cellulose nanocrystals (CNCs) from cotton were functionalized in aqueous medium using methacrylic anhydride (MA) to produce methacrylated cellulose nanocrystals (mCNCs) with a degree of methacrylation (DM) up to 12.6 ± 0.50%. Dispersible as-prepared CNCs and mCNCs were then considered as reinforcing fillers for aqueous 3D-printable formulations based on methacrylated carboxymethylcellulose (mCMC). The rheological properties of such photo-cross-linkable aqueous formulations containing nonmodified CNCs or mCNCs at 0.2 or 0.5 wt% in 2 wt% mCMC were fully investigated. The influence of the presence of nanoparticles on the UV-curing kinetics and dimensions of the photo-cross-linked hydrogels was probed and 13C CP-MAS NMR spectroscopy was used to determine the maximum conversion ratio of methacrylates as well as the optimized time required for UV postcuring. The viscoelasticity of cross-linked hydrogels and swollen hydrogels was also studied. The addition of 0.5 wt% mCNC with a DM of 0.83 ± 0.040% to the formulation yielded faster cross-linking kinetics, better resolution, more robust cross-linked hydrogels, and more stable swollen hydrogels than pure mCMC materials. Additionally, the produced cryogels showed no cytotoxicity toward L929 fibroblasts. This biobased formulation could thus be considered for the 3D printing of hydrogels dedicated to biomedical purposes using vat polymerization techniques, such as stereolithography or digital light processing.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Univ. Grenoble Alpes, CEA, LITEN, DTNM, Grenoble 38054, France.
- Univ. Grenoble Alpes, CEA, LETI, DTBS, Grenoble 38054, France.
- Univ. Grenoble Alpes, CNRS, CERMAV, Saint-Martin-d'Hères 38041, France.
- Univ. Rouen Normandie, INSA Rouen Normandie, CNRS, PBS, Evreux 27000, France.
ORCID-Profile: Guillaume Nonglaton, Bruno Jean
Förderung
- Agence Nationale de la Recherche
- Universit? Grenoble Alpes
- Commissariat ? l'?nergie Atomique et aux ?nergies Alternatives
- LABoratoires d'EXcellence ARCANE
Zitieren
APA
Soullard, L., Pradalié, F., Labat, B., Lancelon-Pin, C., Nonglaton, G., Rolere, S., Texier, I., & Jean, B. (2023). Methacrylated Cellulose Nanocrystals as Fillers for the Development of Photo-Cross-Linkable Cytocompatible Biosourced Formulations Targeting 3D Printing. Biomacromolecules. https://doi.org/10.1021/acs.biomac.3c01090
Vancouver
Soullard L, Pradalié F, Labat B, Lancelon-Pin C, Nonglaton G, Rolere S, et al. Methacrylated Cellulose Nanocrystals as Fillers for the Development of Photo-Cross-Linkable Cytocompatible Biosourced Formulations Targeting 3D Printing. Biomacromolecules. 2023. doi:10.1021/acs.biomac.3c01090
BibTeX
@article{Soullard2023,
author = {Soullard, Lénaïc and Pradalié, Flavie and Labat, Béatrice and Lancelon-Pin, Christine and Nonglaton, Guillaume and Rolere, Sébastien and Texier, Isabelle and Jean, Bruno},
title = {Methacrylated Cellulose Nanocrystals as Fillers for the Development of Photo-Cross-Linkable Cytocompatible Biosourced Formulations Targeting 3D Printing},
journal = {Biomacromolecules},
year = {2023},
doi = {10.1021/acs.biomac.3c01090}
}
EUVIMED