EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quantifying and Utilizing Electroosmotic Flow for Mechanical Measurements with the Scanning Ion Conductance Microscope

Johannes Rheinlaender iD, Tilman E Schäffer iD

Analytical Chemistry · 21.10.2025 · 97 (41) · 22541-22547

DOI: 10.1021/acs.analchem.5c03186 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Analytical Chemistry, online erschienen am 03.10.2025. Verfasst von Johannes Rheinlaender und 1 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Applied Physics, University of Tübingen, Auf der Morgenstelle 10, 72076 Tübingen, Germany. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The scanning ion conductance microscope (SICM) is an emerging imaging technique for the investigation of delicate samples on the nanometer scale in liquid environments using ion current through a glass nanopipette. In recent years, the SICM has been increasingly applied to mechanical measurements, typically using a microfluidic flow in the nanopipette induced by hydrostatic pressure. Here, we introduce the use of electroosmotic flow (EOF) in mechanical SICM measurements. We show that the EOF in small SICM nanopipettes is comparable to the flow induced by commonly applied hydrostatic pressures. We quantify the electroosmotic mobility, which is a central parameter of EOF but strongly depends on experimental conditions, by measuring the streaming current independent of nanopipette geometry. Using decane microdroplets, we show that both EOF and hydrostatic pressure can be used to mechanically probe elastic samples on the nanometer scale. We then develop a numerical model to quantify the stiffness and the Young's modulus of elastic samples using EOF. Finally, we use EOF to map the Young's modulus of living cells, which gives similar results to the hydrostatic pressure method. We thereby demonstrate that EOF can be used to quantitatively probe sample stiffness with the SICM.

Autor:innen und Institutionen

  • Institute of Applied Physics, University of Tübingen, Auf der Morgenstelle 10, 72076 Tübingen, Germany.

ORCID-Profile: Johannes Rheinlaender, Tilman E Schäffer

Zitieren

APA

Rheinlaender, J., & Schäffer, T. E. (2025). Quantifying and Utilizing Electroosmotic Flow for Mechanical Measurements with the Scanning Ion Conductance Microscope. Analytical Chemistry, 97(41), 22541-22547. https://doi.org/10.1021/acs.analchem.5c03186

Vancouver

Rheinlaender J, Schäffer TE. Quantifying and Utilizing Electroosmotic Flow for Mechanical Measurements with the Scanning Ion Conductance Microscope. Analytical Chemistry. 2025;97(41):22541-22547. doi:10.1021/acs.analchem.5c03186

BibTeX
@article{Rheinlaender2025,
  author = {Rheinlaender, Johannes and Schäffer, Tilman E},
  title = {Quantifying and Utilizing Electroosmotic Flow for Mechanical Measurements with the Scanning Ion Conductance Microscope},
  journal = {Analytical Chemistry},
  year = {2025},
  volume = {97},
  number = {41},
  pages = {22541--22547},
  doi = {10.1021/acs.analchem.5c03186}
}
Kostenlos starten →