EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Feasibility assessment of textile electromyography sensors for a wearable telehealth biofeedback system

Beomjun Ju, Jasper I Mark, Seonyoung Youn, Prateeti Ugale, Busra Sennik, Brady Adcock, Amanda C Mills iD

Wearable Technologies · 2025 · 6

DOI: 10.1017/wtc.2025.10012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Wearable Technologies, online erschienen am 16.06.2025. Verfasst von Beomjun Ju und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Textile, Engineering Chemistry and Sciences, Wilson College of Textiles, North Carolina State University, Raleigh, North Carolina, USA. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Institute on Disability, Independent Living, and Rehabilitation Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Our study investigated the efficacy and feasibility of screen-printed and ink-printed textile-based dry electrodes for electromyography (EMG) acquisition, marking a novel step in wearable telehealth (TH) system integration. We controlled the design and fabrication conditions of these textile EMG sensors, including electrode area and sizing, ensuring optimal contact pressure. Skin-electrode impedance for all designs was evaluated, and a 20 mm electrode diameter was deemed material-efficient and design-effective. When compared with standard 20 mm wet electrodes, our EMG sensors with the screen and inkjet-printed dry electrodes exhibited comparable signal-to-noise ratios (SNR dB ) to the conventional wet electrode (26 dB) with a peak of 25 dB, and 23 dB, respectively, emphasizing their reliability. Our research identified a 10% optimal strain by sizing for EMG performance across both printing techniques. These revelations support the future design of dependable, reusable dry textile electrodes, addressing challenges faced by wet electrodes. Additionally, the developed dry electrodes, when equipped with a Bluetooth-enabled amplifier puck mitigate common EMG challenges such as motion artifacts while promoting user comfort, which leads to an elevated user experience during EMG biosignal collection. The integration of the developed garment-based electrodes with available commercial technologies holds promise for enhancing TH systems and user engagement in wearable health monitoring.

Schlagwörter

Stichwörter der Autor:innen

biosignalse-textileselectromyographyinkjet printingscreen printingtelehealth system

Autor:innen und Institutionen

  • Department of Textile, Engineering Chemistry and Sciences, Wilson College of Textiles, North Carolina State University, Raleigh, North Carolina, USA.
  • Impulse Wellness, Chapel Hill, North Carolina, USA.

ORCID-Profile: Amanda C Mills

Förderung

  • National Institute on Disability, Independent Living, and Rehabilitation Research

Zitieren

APA

Ju, B., Mark, J. I., Youn, S., Ugale, P., Sennik, B., Adcock, B., & Mills, A. C. (2025). Feasibility assessment of textile electromyography sensors for a wearable telehealth biofeedback system. Wearable Technologies, 6. https://doi.org/10.1017/wtc.2025.10012

Vancouver

Ju B, Mark JI, Youn S, Ugale P, Sennik B, Adcock B, et al. Feasibility assessment of textile electromyography sensors for a wearable telehealth biofeedback system. Wearable Technologies. 2025;6. doi:10.1017/wtc.2025.10012

BibTeX
@article{Ju2025,
  author = {Ju, Beomjun and Mark, Jasper I and Youn, Seonyoung and Ugale, Prateeti and Sennik, Busra and Adcock, Brady and Mills, Amanda C},
  title = {Feasibility assessment of textile electromyography sensors for a wearable telehealth biofeedback system},
  journal = {Wearable Technologies},
  year = {2025},
  volume = {6},
  doi = {10.1017/wtc.2025.10012}
}
Kostenlos starten →