EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design workflow for porous 3D-printed biocement geometries

Karen A. Antorveza Paez, Shuyi Huang, Kai Hsun Yeh, Kevin Seav, Benjamin Dillenburger

Biotechnology Design · 2026 · 4

DOI: 10.1017/s2977905726100286 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biotechnology Design, online erschienen am 16.07.2026. Verfasst von Karen A. Antorveza Paez und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microbially induced calcium carbonate precipitation (MICP) offers a low-energy, carbon-efficient alternative to traditional mineral material production, yet its integration into digital fabrication for architectural applications remains limited. This research presents a design-to-biofabrication workflow that combines computational geometry, robotic extrusion-based 3D printing and MICP. The study introduces a methodology that uses porosity, surface-area-to-volume (SA/V) ratio, interlayer connectivity and overhang capacity as coupled design parameters that balance biocementation requirements and fabrication constraints. Through iterative testing of triply periodic minimal surfaces (TPMSs) geometries, an “Optimized Unit” was developed and refined to improve printability and biomineralization efficiency. The workflow is validated through a 1 m 2 architectural partition wall demonstrator that illustrates the potential for modular biomineralized architectural components. The results show that calibrated geometric control enables stable extrusion while enhancing mineral distribution, demonstrating a pathway towards architecturally scaled bio-fabricated mineral components.

Zitieren

APA

Paez, K. A. A., Huang, S., Yeh, K. H., Seav, K., & Dillenburger, B. (2026). Design workflow for porous 3D-printed biocement geometries. Biotechnology Design, 4. https://doi.org/10.1017/s2977905726100286

Vancouver

Paez KAA, Huang S, Yeh KH, Seav K, Dillenburger B. Design workflow for porous 3D-printed biocement geometries. Biotechnology Design. 2026;4. doi:10.1017/s2977905726100286

BibTeX
@article{Paez2026,
  author = {Paez, Karen A. Antorveza and Huang, Shuyi and Yeh, Kai Hsun and Seav, Kevin and Dillenburger, Benjamin},
  title = {Design workflow for porous 3D-printed biocement geometries},
  journal = {Biotechnology Design},
  year = {2026},
  volume = {4},
  doi = {10.1017/s2977905726100286}
}
Kostenlos starten →