EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The effect of tail configuration and parameters on the aerodynamic performance of flapping-wing flying robots: design and experiment

Guangze Liu, Erzhen Pan, Fujun Peng, Wenfu Xu

Robotica · 2026-04 · 44 (4) · 1356-1383

DOI: 10.1017/s0263574726103543 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Robotica, online erschienen am 24.06.2026. Verfasst von Guangze Liu und 3 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study systematically addresses the design and aerodynamic optimization of tail configurations for bio-inspired flapping-wing robot. Based on a flapping-wing robot prototype, a theoretical model linking tail-size parameters to the pitch static stability margin was established. Six types of tail configurations — arc-shaped tail, triangular-shaped tail, swallow-shaped tail, webbed tail, T-shaped tail, and V-shaped tail — comprising 17 parametrically varied specimens were designed and fabricated. Through a high-precision decoupled wind-tunnel test platform (free stream velocity: 10 m/s, flapping frequency: 2.5 Hz), the three-axis aerodynamic moments (pitch, yaw, roll) under various actuation states were quantitatively measured. The influence of key geometric parameters such as characteristic width, opening angle, and control-surface area on handling and stability was thoroughly investigated. Experimental results show that the T-shaped tail (#53) performs best in pitch control moment and lateral-directional stability margin, with a peak pitch moment of 0.185 N·m — approximately 42 % higher than the baseline configuration — demonstrating the most outstanding overall performance. The V-shaped tail (#62) exhibits excellent lateral-directional control capability under differential actuation, achieving a roll moment of up to 0.106 N·m, albeit with pronounced control coupling effects. This research provides reliable experimental evidence and a theoretical reference for the configuration selection and parameter optimization of tails in flapping-wing robot, offering significant engineering guidance for enhancing flight quality and control effectiveness. In addition, this paper establishes a theoretical framework for preliminary tail size design based on pitch static stability and proposes a parametric design method for multi-configuration tails for flapping-wing robot. The research results not only provide a theoretical basis for tail parameter selection but also offer experimental references for tail configuration optimization and subsequent control-oriented system design.

Zitieren

APA

Liu, G., Pan, E., Peng, F., & Xu, W. (2026). The effect of tail configuration and parameters on the aerodynamic performance of flapping-wing flying robots: design and experiment. Robotica, 44(4), 1356-1383. https://doi.org/10.1017/s0263574726103543

Vancouver

Liu G, Pan E, Peng F, Xu W. The effect of tail configuration and parameters on the aerodynamic performance of flapping-wing flying robots: design and experiment. Robotica. 2026;44(4):1356-1383. doi:10.1017/s0263574726103543

BibTeX
@article{Liu2026,
  author = {Liu, Guangze and Pan, Erzhen and Peng, Fujun and Xu, Wenfu},
  title = {The effect of tail configuration and parameters on the aerodynamic performance of flapping-wing flying robots: design and experiment},
  journal = {Robotica},
  year = {2026},
  volume = {44},
  number = {4},
  pages = {1356--1383},
  doi = {10.1017/s0263574726103543}
}
Kostenlos starten →