EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Harnessing length and height changes in thermoresponsive programmable materials

Dilip Chalissery, Tobias Rümmler, Fabian Ziervogel, Chris Eberl, Thorsten Pretsch

Programmable Materials · 2023

DOI: 10.1017/pma.2023.9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Programmable Materials, 2023. Verfasst von Dilip Chalissery und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund, Fraunhofer-Gesellschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Shape-memory polymers can be used to develop thermoresponsive programmable materials that can take on sensory and actuator tasks as their ambient temperature changes. In this contribution, a self-synthesised poly(1,10-decylene adipate) diol-based polyester urethane (PEU) was used for their fabrication. After processing the PEU into filaments, programmable materials, including a gear-like object, the teeth of a ‘bevel gear’ and a unit cell, were additively manufactured by fused filament fabrication. In any case, a thermomechanical treatment was conducted that involved the deformation of the polymer at 75°C. After cooling to 15°C, the programmable materials were unloaded and the thermoresponsiveness between 23°C and 58°C was investigated. A maximum thermoreversible change in height of about 39% was detected for the ‘gear’. With regard to the ‘bevel gear’, proof of feasibility was provided for use as overheating protection, so that a force transmission could be switched off when heated and switched on when cooled down. The unit cell actuated under a weak external load of 0.01 N, thus exhibiting thermoreversible length changes of about 45%.

Förderung

  • European Regional Development Fund
  • Fraunhofer-Gesellschaft

Zitieren

APA

Chalissery, D., Rümmler, T., Ziervogel, F., Eberl, C., & Pretsch, T. (2023). Harnessing length and height changes in thermoresponsive programmable materials. Programmable Materials. https://doi.org/10.1017/pma.2023.9

Vancouver

Chalissery D, Rümmler T, Ziervogel F, Eberl C, Pretsch T. Harnessing length and height changes in thermoresponsive programmable materials. Programmable Materials. 2023. doi:10.1017/pma.2023.9

BibTeX
@article{Chalissery2023,
  author = {Chalissery, Dilip and Rümmler, Tobias and Ziervogel, Fabian and Eberl, Chris and Pretsch, Thorsten},
  title = {Harnessing length and height changes in thermoresponsive programmable materials},
  journal = {Programmable Materials},
  year = {2023},
  doi = {10.1017/pma.2023.9}
}
Kostenlos starten →