Achievable mechanical performance of generatively designed PA6-CF and PLA components fabricated by desktop material extrusion
Proceedings of the Design Society · 2026-08 · 6 · 1901-1910
DOI: 10.1017/pds.2026.10548 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Design Society, online erschienen am 02.07.2026. Verfasst von Christer W. Elverum und 2 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
This study investigates the mechanical performance of PA6-CF and PLA components fabricated with desktop material extrusion additive manufacturing. To define the geometry, low-cost 3D scanning was used in combination with Generative Design in Autodesk Fusion 360. PA6-CF outperformed PLA by 25% in pre-failure peak load (1.85 kN vs. 1.47 kN), despite the datasheet values suggesting a 450% advantage in interlayer strength. Poor interlayer bonding of PA6-CF is attributed to low layer temperatures (87–136 °C) during the printing process, indicating that a chamber temperature of 60 °C is inadequate.
Zitieren
APA
Elverum, C. W., Martinsen, H. R., & Eikevåg, S. W. (2026). Achievable mechanical performance of generatively designed PA6-CF and PLA components fabricated by desktop material extrusion. Proceedings of the Design Society, 6, 1901-1910. https://doi.org/10.1017/pds.2026.10548
Vancouver
Elverum CW, Martinsen HR, Eikevåg SW. Achievable mechanical performance of generatively designed PA6-CF and PLA components fabricated by desktop material extrusion. Proceedings of the Design Society. 2026;6:1901-1910. doi:10.1017/pds.2026.10548
BibTeX
@article{Elverum2026,
author = {Elverum, Christer W. and Martinsen, Håvard Revheim and Eikevåg, Sindre W.},
title = {Achievable mechanical performance of generatively designed PA6-CF and PLA components fabricated by desktop material extrusion},
journal = {Proceedings of the Design Society},
year = {2026},
volume = {6},
pages = {1901--1910},
doi = {10.1017/pds.2026.10548}
}
EUVIMED