EUVIMEDEUVIMED entdecken
Crossref

Ploughing-Pulling Forming for Wicking Structure of Flat Micro-Groove Heat Pipe and Machine Tool Optimization

Xibing Li, Zhixiong Ye, Nanpeng Li, Jialun Chen, Tengyue Zou

Journal of Mechanics · 2020-08 · 36 (4) · 423-435

DOI: 10.1017/jmech.2019.53 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanics, online erschienen am 27.02.2020. Verfasst von Xibing Li und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 12 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In forming procedure of the micro grooves in the flat micro-groove heat pipe, the tie rod is often observed to be broken and the multi-tooth cutter is damaged due to the sharp increase of the ploughing-pulling pressure. This paper theoretically analyzes the factors affecting the capillary heat transferring limit of the micro-groove heat pipe, and simulates the machining process using finite element to acquire the best processing parameters: the squeeze angle is 120°, the drawing depth is 0.25mm, and the ploughing-pulling velocity is 100mm/s. Then these parameters are verified by real manufacturing experiments. The experimental results show that the ploughing-pulling pressure of the micro-groove forming process is close to the strength limit of the rod or multi-tooth cutter, and the process makes little swarf during work. Thus, only using the appropriate machine tool parameters, forming parameters and forming methods can make the wicking structure of flat micro-groove micro-heat pipe with the best heat transferring performance.

Zitieren

APA

Li, X., Ye, Z., Li, N., Chen, J., & Zou, T. (2020). Ploughing-Pulling Forming for Wicking Structure of Flat Micro-Groove Heat Pipe and Machine Tool Optimization. Journal of Mechanics, 36(4), 423-435. https://doi.org/10.1017/jmech.2019.53

Vancouver

Li X, Ye Z, Li N, Chen J, Zou T. Ploughing-Pulling Forming for Wicking Structure of Flat Micro-Groove Heat Pipe and Machine Tool Optimization. Journal of Mechanics. 2020;36(4):423-435. doi:10.1017/jmech.2019.53

BibTeX
@article{Li2020,
  author = {Li, Xibing and Ye, Zhixiong and Li, Nanpeng and Chen, Jialun and Zou, Tengyue},
  title = {Ploughing-Pulling Forming for Wicking Structure of Flat Micro-Groove Heat Pipe and Machine Tool Optimization},
  journal = {Journal of Mechanics},
  year = {2020},
  volume = {36},
  number = {4},
  pages = {423--435},
  doi = {10.1017/jmech.2019.53}
}
Kostenlos starten →