Asymmetric velocity boundary conditions lead to zonal flow in centrifugal convection
Journal of Fluid Mechanics · 10.08.2026 · 1040
DOI: 10.1017/jfm.2026.11858 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 27.07.2026. Verfasst von Jun Zhong und 1 weiteren Autor:innen. Die Arbeit nennt 71 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
We perform two-dimensional direct numerical simulations of rapidly rotating annular centrifugal convection to investigate how mixed (asymmetric) velocity boundary conditions and geometric curvature shape the flow organisation and heat transfer in the quasi-two-dimensional, rotation-constrained regime. Motivated by the quasi-two-dimensionalisation under strong rotation and the long spin-up required for large-scale states, we employ two-dimensional simulations and consider four boundary-condition sets: no slip/no slip (INON), no slip/stress free (INOS), stress free/no slip (ISON) and stress free/stress free (ISOS). For fixed geometry with the radius ratio eta equals 0.5 η = 0.5 $\eta =0.5$ and over the Rayleigh-number range italic Ra element of left bracket 10 Superscript 6 Baseline comma 10 Superscript 9 Baseline right bracket Ra ∈ [ 10 6 , 10 9 ] $ \textit{Ra}\in [10^6,10^9]$ , the heat transfer is strongest for ISOS, followed by INOS and INON, while ISON exhibits a pronounced suppression as a strong zonal flow aligned with the rotation develops. In the three cases where the flow remains in a roll-dominated state, the Nusselt number italic Nu Nu $ \textit{Nu}$ follows an effective classical-type scaling close to italic Nu tilde upper R a Superscript 0.27 Nu ∼ R a 0.27 $ \textit{Nu}\sim Ra^{0.27}$ , whereas the zonal-flow branch displays a much weaker scaling italic Nu tilde upper R a Superscript 0.1 Nu ∼ R a 0.1 $ \textit{Nu}\sim Ra^{0.1}$ and strong flow anisotropy with a large difference between the radial and azimuthal Reynolds numbers italic Re Subscript r Baseline much less than upper R e Subscript phi Re r ≪ R e φ $ \textit{Re}_r\ll Re_\varphi$ . A dissipation analysis shows that zonal-flow formation is accompanied by a transition from boundary-layer-dominated dissipation to a relatively low and uniform bulk dissipation, consistent with shear-induced plume suppression. Using a representative curvature scan at fixed italic Ra equals 10 Superscript 7 Ra = 10 7 $ \textit{Ra}=10^7$ , we find that, within this quasi-two-dimensional, strongly rotating regime, increasing eta η $\eta$ weakens the curvature asymmetry and makes the ISON zonal-flow branch less robust, with the flow approaching roll-dominated convection in the planar limit; the accompanying bulk-temperature asymmetry is interpreted in terms of the boundary heat-flux asymmetry using a free-convective boundary-layer model.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhong, J., & Sun, C. (2026). Asymmetric velocity boundary conditions lead to zonal flow in centrifugal convection. Journal of Fluid Mechanics, 1040. https://doi.org/10.1017/jfm.2026.11858
Vancouver
Zhong J, Sun C. Asymmetric velocity boundary conditions lead to zonal flow in centrifugal convection. Journal of Fluid Mechanics. 2026;1040. doi:10.1017/jfm.2026.11858
BibTeX
@article{Zhong2026,
author = {Zhong, Jun and Sun, Chao},
title = {Asymmetric velocity boundary conditions lead to zonal flow in centrifugal convection},
journal = {Journal of Fluid Mechanics},
year = {2026},
volume = {1040},
doi = {10.1017/jfm.2026.11858}
}
EUVIMED