EUVIMEDEUVIMED entdecken
Crossref

Adiabatic-section flow in axial-groove heat pipes with varying meniscus curvature

Marc Hodes, Haotian Jia, Andrew Daetz, Toby L. Kirk

Journal of Fluid Mechanics · 10.08.2026 · 1040

DOI: 10.1017/jfm.2026.11806 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 03.08.2026. Verfasst von Marc Hodes und 3 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Via asymptotics and numerics, we develop a semi-analytical procedure to capture the effect of slowly varying (streamwise) meniscus curvature on the flow resistance of the adiabatic section of an axial-groove heat pipe (AGHP). The small parameter is the pitch of the grooves divided by the length of the section. The geometry of the AGHP, its orientation with respect to gravity and relevant thermophysical properties (and, thus, the maximum capillary pressure) are prescribed. The deviation of the radius of curvature of the menisci from that of the lands (raised ridges protruding into the heat pipe bounding the axial grooves through which liquid flows) is captured numerically. (Alternatively, a boundary perturbation approach using a second small parameter, a protrusion angle of the meniscus into the groove, is outlined.) A local analysis ensures that the singularities at the triple-contact lines are resolved. Our procedure enables more accurate prediction of the capillary limit of an AGHP and the thermal resistance of its adiabatic section because, as shown, it causes the flow resistance in the adiabatic section in an AGHP representative of a commercial one to change by as much as 70 %. Instructions to access our code to semi-analytically compute the capillary limit when the radii of the menisci and lands are equal but, unlike in previous literature, shear stress and velocity are matched along the meniscus in the adiabatic section, are provided.

Zitieren

APA

Hodes, M., Jia, H., Daetz, A., & Kirk, T. L. (2026). Adiabatic-section flow in axial-groove heat pipes with varying meniscus curvature. Journal of Fluid Mechanics, 1040. https://doi.org/10.1017/jfm.2026.11806

Vancouver

Hodes M, Jia H, Daetz A, Kirk TL. Adiabatic-section flow in axial-groove heat pipes with varying meniscus curvature. Journal of Fluid Mechanics. 2026;1040. doi:10.1017/jfm.2026.11806

BibTeX
@article{Hodes2026,
  author = {Hodes, Marc and Jia, Haotian and Daetz, Andrew and Kirk, Toby L.},
  title = {Adiabatic-section flow in axial-groove heat pipes with varying meniscus curvature},
  journal = {Journal of Fluid Mechanics},
  year = {2026},
  volume = {1040},
  doi = {10.1017/jfm.2026.11806}
}
Kostenlos starten →